Complete aluminum honeycomb cleanroom sandwich panel with metal facings

クリーンルームの壁と天井システム

アルミニウムの蜂の巣クリーンルームサンドイッチパネル

A high-flatness cleanroom wall and ceiling panel using a hexagonal aluminum honeycomb core between smooth metal facings, combining low weight, non-shedding construction and strong resistance to bending.

Aluminum Honeycomb Core
High Strength-to-Weight Ratio
Excellent Surface Flatness
Non-Shedding Interior

見積もりリクエスト製品案内

商品紹介

Aluminum Honeycomb Cleanroom Panels use thin aluminum foil formed into hexagonal cells and bonded between metal skins. Thousands of cell walls support the facings, giving the panel high bending stiffness without the mass of a dense mineral core. The all-metal cellular center does not release fibres and is well suited to smooth wall modules and accessible ceilings. Four-sided aluminum framing closes the core and provides accurate connections for tongues, trims and suspension hardware. Local reinforcement can be built in where lights or service equipment impose concentrated loads.

主要な特徴

Hexagonal cells act as closely spaced webs that resist bending in multiple directions.

Low core mass reduces ceiling dead load and simplifies lifting of large modules.

The aluminum core is non-shedding and remains dimensionally stable in normal indoor humidity.

Uniform cellular support produces a notably flat finished face.

Reinforced inserts can transfer localized equipment loads into the surrounding frame.

お客様の製品に関する懸念事項

Selection normally centers on local load reinforcement, edge closure, acoustic behavior and interface precision.

Ceiling panels must remain light while resisting deflection across service openings.Aluminum honeycomb provides high bending stiffness with substantially less core mass than dense mineral panels.

Fixtures can crush thin honeycomb cells when loads are applied at one small point.Solid inserts and perimeter rails spread concentrated loads into a wider panel area.

Open foil cells at cut edges can collect debris and complicate cleaning.Four-sided frames and finished cut-outs completely close every exposed honeycomb edge.

Poorly bonded skins can create visible local waviness.Controlled adhesive coverage and uniform pressing maintain continuous support across the panel face.

典型的な用途

Semiconductor and microelectronics cleanroomsWalk-access service ceilingsBiopharmaceutical production enclosuresPrecision laboratoriesHigh-flatness modular partitions

技術的なパラメータ

Common cleanroom-grade aluminum honeycomb panel specifications are listed below.

コア材料	3003-series hexagonal aluminum honeycomb, 5–8 mm cell size
パネルの厚さ	40, 50, 60 or 80 mm
有効幅	1100 or 1200 mm
最大長さ	6000 mm
鋼鉄の厚さを直面する	0.50 — 0.60 mm
コア密度	約 27 kg / m3
熱伝導率	0.11 — 0.15 W / （m · K）
表面仕上げ	PVC-laminated, polyester-coated or stainless steel surface
ジョイントタイプ	Four-sided aluminum frame with PVC or aluminum tongue
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Load-bearing ceiling insertsStainless steel or aluminum facingAlternative honeycomb cell sizeIntegrated lighting and filter openings

Planning a Aluminum Honeycomb Cleanroom Sandwich Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する