Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom mur et systèmes de plafond
Aluminium Honeycomb Cleanroom Panneau Sandwich
A high-flatness cleanroom wall and ceiling panel using a hexagonal aluminum honeycomb core between smooth metal facings, combining low weight, non-shedding construction and strong resistance to bending.
- Aluminum Honeycomb Core
- High Strength-to-Weight Ratio
- Excellent Surface Flatness
- Non-Shedding Interior
Introduction de produit
Aluminum Honeycomb Cleanroom Panels use thin aluminum foil formed into hexagonal cells and bonded between metal skins. Thousands of cell walls support the facings, giving the panel high bending stiffness without the mass of a dense mineral core. The all-metal cellular center does not release fibres and is well suited to smooth wall modules and accessible ceilings. Four-sided aluminum framing closes the core and provides accurate connections for tongues, trims and suspension hardware. Local reinforcement can be built in where lights or service equipment impose concentrated loads.
Key Features
Low core mass reduces ceiling dead load and simplifies lifting of large modules.
The aluminum core is non-shedding and remains dimensionally stable in normal indoor humidity.
Uniform cellular support produces a notably flat finished face.
Reinforced inserts can transfer localized equipment loads into the surrounding frame.
Préoccupations du client produit
Selection normally centers on local load reinforcement, edge closure, acoustic behavior and interface precision.
Ceiling panels must remain light while resisting deflection across service openings.Aluminum honeycomb provides high bending stiffness with substantially less core mass than dense mineral panels.
Fixtures can crush thin honeycomb cells when loads are applied at one small point.Solid inserts and perimeter rails spread concentrated loads into a wider panel area.
Open foil cells at cut edges can collect debris and complicate cleaning.Four-sided frames and finished cut-outs completely close every exposed honeycomb edge.
Poorly bonded skins can create visible local waviness.Controlled adhesive coverage and uniform pressing maintain continuous support across the panel face.
Les applications typiques
Semiconductor and microelectronics cleanroomsWalk-access service ceilingsBiopharmaceutical production enclosuresPrecision laboratoriesHigh-flatness modular partitions
Paramètres techniques
Common cleanroom-grade aluminum honeycomb panel specifications are listed below.
| Matériaux de base | 3003-series hexagonal aluminum honeycomb, 5–8 mm cell size |
|---|---|
| Panneau épaisseur | 40, 50, 60 or 80 mm |
| Largeur effective | 1100 or 1200 mm |
| Longueur maximale | 6000 mm |
| Acier face épaisseur | 0.50–0.60 mm |
| Densité Core | Environ 27 kg / m3 |
| Conductivité thermique | 0,11 - 0,15 W / (m · K) |
| surface finie | PVC-laminated, polyester-coated or stainless steel surface |
| Type joint | Four-sided aluminum frame with PVC or aluminum tongue |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Load-bearing ceiling insertsStainless steel or aluminum facingAlternative honeycomb cell sizeIntegrated lighting and filter openings
Planning a Aluminum Honeycomb Cleanroom Sandwich Panel specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
