Complete aluminum honeycomb cleanroom sandwich panel with metal facings

클린룸 벽 및 천장 시스템

알루미늄 벌집 클린룸 샌드위치 패널

A high-flatness cleanroom wall and ceiling panel using a hexagonal aluminum honeycomb core between smooth metal facings, combining low weight, non-shedding construction and strong resistance to bending.

Aluminum Honeycomb Core
High Strength-to-Weight Ratio
Excellent Surface Flatness
Non-Shedding Interior

견적 요청 제품 찾아보기

상품 소개

Aluminum Honeycomb Cleanroom Panels use thin aluminum foil formed into hexagonal cells and bonded between metal skins. Thousands of cell walls support the facings, giving the panel high bending stiffness without the mass of a dense mineral core. The all-metal cellular center does not release fibres and is well suited to smooth wall modules and accessible ceilings. Four-sided aluminum framing closes the core and provides accurate connections for tongues, trims and suspension hardware. Local reinforcement can be built in where lights or service equipment impose concentrated loads.

주요 기능

Hexagonal cells act as closely spaced webs that resist bending in multiple directions.

Low core mass reduces ceiling dead load and simplifies lifting of large modules.

The aluminum core is non-shedding and remains dimensionally stable in normal indoor humidity.

Uniform cellular support produces a notably flat finished face.

Reinforced inserts can transfer localized equipment loads into the surrounding frame.

고객 제품 관심사

Selection normally centers on local load reinforcement, edge closure, acoustic behavior and interface precision.

Ceiling panels must remain light while resisting deflection across service openings.Aluminum honeycomb provides high bending stiffness with substantially less core mass than dense mineral panels.

Fixtures can crush thin honeycomb cells when loads are applied at one small point.Solid inserts and perimeter rails spread concentrated loads into a wider panel area.

Open foil cells at cut edges can collect debris and complicate cleaning.Four-sided frames and finished cut-outs completely close every exposed honeycomb edge.

Poorly bonded skins can create visible local waviness.Controlled adhesive coverage and uniform pressing maintain continuous support across the panel face.

일반적인 응용 프로그램

Semiconductor and microelectronics cleanroomsWalk-access service ceilingsBiopharmaceutical production enclosuresPrecision laboratoriesHigh-flatness modular partitions

기술 매개변수

Common cleanroom-grade aluminum honeycomb panel specifications are listed below.

핵심 재료	3003-series hexagonal aluminum honeycomb, 5–8 mm cell size
패널 두께	40, 50, 60 or 80 mm
유효 폭	1100 or 1200 mm
최대 길이	6000 mm
강철 면면 두께	0. 50 - 0. 60 mm
코어 밀도	약 27 kg / m 3
열전도도 (Thermal Conductivity)	0. 11 - 0. 15 W / (m · K)
표면 마무리	PVC-laminated, polyester-coated or stainless steel surface
접합 유형	Four-sided aluminum frame with PVC or aluminum tongue
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Load-bearing ceiling insertsStainless steel or aluminum facingAlternative honeycomb cell sizeIntegrated lighting and filter openings

Planning a Aluminum Honeycomb Cleanroom Sandwich Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.