İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda zemin sistemleri
Alüminyum Temiz Oda Cove Base
A two-part extruded aluminum profile that clips over a concealed backing angle to form a smooth, rigid radius at the cleanroom floor-to-wall junction.
- 50 mm Hygienic Radius
- Concealed Clip Fixing
- Rigid Aluminum Face
- Sealable Profile Edges
Ürün tanıtımı
The aluminum cleanroom cove base replaces the sharp internal floor-to-wall corner with a rigid curved face. A backing angle is fixed behind the visible profile, allowing the finished cove to clip into place without exposed screw heads. The extruded 6063 aluminum face can be polyester powder coated to coordinate with modular wall panels, while narrow sealant lines close its upper and lower edges. Prefabricated internal, external and three-way accessories keep the same radius through room corners.
Ana Özellikler
The two-part clip construction hides mechanical fasteners behind a continuous wipe-clean face.
Rigid aluminum protects the panel base against mops, footwear and light trolley contact.
Matching corner pieces and end caps avoid hand-cut open ends at changes in direction.
Müşteri Ürün Sorunları
A modular cleanroom base junction must close the cleaning corner without exposing fixings or preventing coordinated wall-panel installation.
Dust and cleaning residue remain in a sharp 90-degree floor-to-wall angle.The broad extruded radius creates an accessible curved wiping path.
Surface screws interrupt the cove face and trap fibres around their heads.A concealed backing angle receives the clip-on finish profile behind the visible surface.
Site-cut mitres leave mismatched corners and open profile ends.Purpose-made internal, external and three-way accessories continue the selected radius.
A soft skirting is easily marked where carts pass close to the partition.The rigid aluminum face provides a durable buffer along the panel base.
Tipik uygulamalar
Modular pharmaceutical cleanroomsLaboratory wall-panel basesMedical device production suitesFood processing controlled roomsClean corridors and personnel airlocks
Teknik parametreler
Typical dimensions and materials for a clip-on modular cleanroom aluminum cove base are listed below.
| Temel malzemeler | Extruded 6063 aluminum cove face with matching aluminum backing angle |
|---|---|
| Panel kalınlığı | Approximately 1.2–2.0 mm aluminum profile wall thickness |
| Effective Width (Etkili Genişlik) | 50 mm nominal internal cove radius |
| Maksimum uzunluk | 3000 mm standard straight profile length |
| Çelik yüz yüze kalınlığı | 0 mm; the visible face and backing are aluminum |
| Core Density (Çekirdek Yoğunluğu) | Approximately 2700 kg/m³ for 6063 aluminum alloy |
| Termal İletkenlik | Approximately 160–205 W/(m·K) for architectural aluminum alloy |
| Yüzey bitirme | Smooth polyester powder coat or clear anodized finish with colour-matched accessories |
| Ortak tip | Clip-on curved face over a screw-fixed backing angle, with sealant at both exposed edges |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
40, 45 or 50 mm cove radiusClear anodized or powder-coated finishInternal, external and three-way corner piecesEnd caps and colour-matched edge sealant
Planning a Aluminum Cleanroom Cove Base specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
