클린룸 바닥 시스템

알루미늄 클린룸 코브 베이스

A two-part extruded aluminum profile that clips over a concealed backing angle to form a smooth, rigid radius at the cleanroom floor-to-wall junction.

50 mm Hygienic Radius
Concealed Clip Fixing
Rigid Aluminum Face
Sealable Profile Edges

견적 요청 제품 찾아보기

상품 소개

The aluminum cleanroom cove base replaces the sharp internal floor-to-wall corner with a rigid curved face. A backing angle is fixed behind the visible profile, allowing the finished cove to clip into place without exposed screw heads. The extruded 6063 aluminum face can be polyester powder coated to coordinate with modular wall panels, while narrow sealant lines close its upper and lower edges. Prefabricated internal, external and three-way accessories keep the same radius through room corners.

주요 기능

A 50 mm radius removes the inaccessible right-angle recess at the base of the wall.

The two-part clip construction hides mechanical fasteners behind a continuous wipe-clean face.

Rigid aluminum protects the panel base against mops, footwear and light trolley contact.

Matching corner pieces and end caps avoid hand-cut open ends at changes in direction.

고객 제품 관심사

A modular cleanroom base junction must close the cleaning corner without exposing fixings or preventing coordinated wall-panel installation.

Dust and cleaning residue remain in a sharp 90-degree floor-to-wall angle.The broad extruded radius creates an accessible curved wiping path.

Surface screws interrupt the cove face and trap fibres around their heads.A concealed backing angle receives the clip-on finish profile behind the visible surface.

Site-cut mitres leave mismatched corners and open profile ends.Purpose-made internal, external and three-way accessories continue the selected radius.

A soft skirting is easily marked where carts pass close to the partition.The rigid aluminum face provides a durable buffer along the panel base.

일반적인 응용 프로그램

Modular pharmaceutical cleanroomsLaboratory wall-panel basesMedical device production suitesFood processing controlled roomsClean corridors and personnel airlocks

기술 매개변수

Typical dimensions and materials for a clip-on modular cleanroom aluminum cove base are listed below.

핵심 재료	Extruded 6063 aluminum cove face with matching aluminum backing angle
패널 두께	Approximately 1.2–2.0 mm aluminum profile wall thickness
유효 폭	50 mm nominal internal cove radius
최대 길이	3000 mm standard straight profile length
강철 면면 두께	0 mm; the visible face and backing are aluminum
코어 밀도	Approximately 2700 kg/m³ for 6063 aluminum alloy
열전도도 (Thermal Conductivity)	Approximately 160–205 W/(m·K) for architectural aluminum alloy
표면 마무리	Smooth polyester powder coat or clear anodized finish with colour-matched accessories
접합 유형	Clip-on curved face over a screw-fixed backing angle, with sealant at both exposed edges
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

40, 45 or 50 mm cove radiusClear anodized or powder-coated finishInternal, external and three-way corner piecesEnd caps and colour-matched edge sealant

Planning a Aluminum Cleanroom Cove Base specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.