English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы полы для чистых комнат
Алюминиевая база для чистых комнат
A two-part extruded aluminum profile that clips over a concealed backing angle to form a smooth, rigid radius at the cleanroom floor-to-wall junction.
- 50 mm Hygienic Radius
- Concealed Clip Fixing
- Rigid Aluminum Face
- Sealable Profile Edges
Введение продукции
The aluminum cleanroom cove base replaces the sharp internal floor-to-wall corner with a rigid curved face. A backing angle is fixed behind the visible profile, allowing the finished cove to clip into place without exposed screw heads. The extruded 6063 aluminum face can be polyester powder coated to coordinate with modular wall panels, while narrow sealant lines close its upper and lower edges. Prefabricated internal, external and three-way accessories keep the same radius through room corners.
Основные характеристики
The two-part clip construction hides mechanical fasteners behind a continuous wipe-clean face.
Rigid aluminum protects the panel base against mops, footwear and light trolley contact.
Matching corner pieces and end caps avoid hand-cut open ends at changes in direction.
Обеспокоенность клиентов продуктами
A modular cleanroom base junction must close the cleaning corner without exposing fixings or preventing coordinated wall-panel installation.
Dust and cleaning residue remain in a sharp 90-degree floor-to-wall angle.The broad extruded radius creates an accessible curved wiping path.
Surface screws interrupt the cove face and trap fibres around their heads.A concealed backing angle receives the clip-on finish profile behind the visible surface.
Site-cut mitres leave mismatched corners and open profile ends.Purpose-made internal, external and three-way accessories continue the selected radius.
A soft skirting is easily marked where carts pass close to the partition.The rigid aluminum face provides a durable buffer along the panel base.
Типичные приложения
Modular pharmaceutical cleanroomsLaboratory wall-panel basesMedical device production suitesFood processing controlled roomsClean corridors and personnel airlocks
Технические параметры
Typical dimensions and materials for a clip-on modular cleanroom aluminum cove base are listed below.
| Основной материал | Extruded 6063 aluminum cove face with matching aluminum backing angle |
|---|---|
| Толщина панели | Approximately 1.2–2.0 mm aluminum profile wall thickness |
| эффективная ширина | 50 mm nominal internal cove radius |
| Максимальная длина | 3000 mm standard straight profile length |
| Толщина линий стали | 0 mm; the visible face and backing are aluminum |
| Плотность ядра | Approximately 2700 kg/m³ for 6063 aluminum alloy |
| Теплопроводимость | Approximately 160–205 W/(m·K) for architectural aluminum alloy |
| Поверхностная отделка | Smooth polyester powder coat or clear anodized finish with colour-matched accessories |
| Объединенный тип | Clip-on curved face over a screw-fixed backing angle, with sealant at both exposed edges |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
40, 45 or 50 mm cove radiusClear anodized or powder-coated finishInternal, external and three-way corner piecesEnd caps and colour-matched edge sealant
Planning a Aluminum Cleanroom Cove Base specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
