Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Aluminio Cleanroom Cove Base
A two-part extruded aluminum profile that clips over a concealed backing angle to form a smooth, rigid radius at the cleanroom floor-to-wall junction.
- 50 mm Hygienic Radius
- Concealed Clip Fixing
- Rigid Aluminum Face
- Sealable Profile Edges
Introducción del producto
The aluminum cleanroom cove base replaces the sharp internal floor-to-wall corner with a rigid curved face. A backing angle is fixed behind the visible profile, allowing the finished cove to clip into place without exposed screw heads. The extruded 6063 aluminum face can be polyester powder coated to coordinate with modular wall panels, while narrow sealant lines close its upper and lower edges. Prefabricated internal, external and three-way accessories keep the same radius through room corners.
Características clave
The two-part clip construction hides mechanical fasteners behind a continuous wipe-clean face.
Rigid aluminum protects the panel base against mops, footwear and light trolley contact.
Matching corner pieces and end caps avoid hand-cut open ends at changes in direction.
Preocupaciones del producto del cliente
A modular cleanroom base junction must close the cleaning corner without exposing fixings or preventing coordinated wall-panel installation.
Dust and cleaning residue remain in a sharp 90-degree floor-to-wall angle.The broad extruded radius creates an accessible curved wiping path.
Surface screws interrupt the cove face and trap fibres around their heads.A concealed backing angle receives the clip-on finish profile behind the visible surface.
Site-cut mitres leave mismatched corners and open profile ends.Purpose-made internal, external and three-way accessories continue the selected radius.
A soft skirting is easily marked where carts pass close to the partition.The rigid aluminum face provides a durable buffer along the panel base.
Aplicaciones típicas
Modular pharmaceutical cleanroomsLaboratory wall-panel basesMedical device production suitesFood processing controlled roomsClean corridors and personnel airlocks
Parámetros técnicos
Typical dimensions and materials for a clip-on modular cleanroom aluminum cove base are listed below.
| Materiales Core | Extruded 6063 aluminum cove face with matching aluminum backing angle |
|---|---|
| Panel de espesor | Approximately 1.2–2.0 mm aluminum profile wall thickness |
| Ancho efectivo | 50 mm nominal internal cove radius |
| Longitud máxima | 3000 mm standard straight profile length |
| Acero frente a espesor | 0 mm; the visible face and backing are aluminum |
| Densidad Core | Approximately 2700 kg/m³ for 6063 aluminum alloy |
| Conductividad térmica | Approximately 160–205 W/(m·K) for architectural aluminum alloy |
| Superficie acabada | Smooth polyester powder coat or clear anodized finish with colour-matched accessories |
| Tipo conjunto | Clip-on curved face over a screw-fixed backing angle, with sealant at both exposed edges |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
40, 45 or 50 mm cove radiusClear anodized or powder-coated finishInternal, external and three-way corner piecesEnd caps and colour-matched edge sealant
Planning a Aluminum Cleanroom Cove Base specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
