Complete AHU control cabinet with color touchscreen and ventilation controls

Temiz Oda Kontrolü ve Çevre İzleme Sistemleri

AHU Kontrol Sistemi

A dedicated AHU automation package for fan pressure, temperature, humidity, dampers, heating and cooling coils, filters and protective operating sequences.

Supply-Air Condition Control
Fan and VFD Sequencing
Filter Pressure Monitoring
Coil and Damper Protection

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The AHU control panel combines a local controller, motor interfaces, analog inputs and protective circuits around the air-handler sequence. Supply-air temperature and humidity loops coordinate cooling, heating and humidification, while fan speed responds to duct pressure or airflow demand. Differential-pressure inputs indicate filter loading and airflow proof contacts confirm safe operation before conditioning stages are enabled. Freeze, smoke, high-temperature and fan-failure interlocks move the unit to predefined safe states.

Ana Özellikler

Coordinated heating, cooling and humidity loops reduce opposing control actions.

VFD speed control maintains supply static pressure as terminal airflow demand changes.

Filter differential pressure and fan proof signals provide early maintenance indicators.

Hardwired and programmed interlocks protect coils, heaters and downstream cleanroom zones.

Müşteri Ürün Sorunları

Cleanroom air handlers must maintain stable supply conditions while responding safely to changing airflow demand and equipment faults.

Cooling and reheat operate against each other and waste energy.Sequenced control assigns clear priority and deadbands between conditioning stages.

A loaded filter reduces room airflow before maintenance notices.Dedicated differential-pressure trends and alarm thresholds reveal increasing filter resistance.

Fan speed changes cause unstable supply-duct pressure.A tuned pressure loop modulates the VFD within defined minimum and maximum limits.

A freeze or smoke input leaves dampers and coils in an unsafe state.Interlock logic commands fans, dampers and valves to a predetermined protective sequence.

Tipik uygulamalar

Pharmaceutical makeup-air unitsCleanroom recirculation AHUsLaboratory supply systemsHumidity-controlled production areas

Teknik parametreler

Typical physical construction for a cleanroom AHU control cabinet is listed below.

Temel malzemeler	Powder-coated steel cabinet with FR-4 controller boards, copper distribution and flame-retardant terminal ducts
Panel kalınlığı	300-600 mm cabinet depth
Effective Width (Etkili Genişlik)	800-1600 mm cabinet width
Maksimum uzunluk	Up to 2200 mm cabinet height
Çelik yüz yüze kalınlığı	1.5-2.0 mm powder-coated steel enclosure
Core Density (Çekirdek Yoğunluğu)	7800-8050 kg/m³ for steel structural parts
Termal İletkenlik	45-60 W/(m·K) for steel enclosure panels
Yüzey bitirme	Light-gray powder coat with blue, green and red control indicators
Ortak tip	Floor-standing segmented cabinet with isolated motor, controller and field-terminal sections
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Dual-fan lead-lag controlHumidifier interfaceHeat-recovery sequenceLocal touchscreen HMI

Planning a AHU Control System specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun