Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Centro de Control Motor
A floor-standing assembly that groups starters, protection, variable-speed drives and feeder controls for multiple cleanroom utility motors.
- Compartmentalized Motor Feeders
- Common Horizontal Bus
- Withdrawable or Fixed Units
- Networked Motor Monitoring
Introducción del producto
The motor control center combines multiple vertical sections around a common bus and cable system. Each motor feeder can contain isolation, short-circuit protection, contactor or drive, overload relay and control terminals in a dedicated compartment. Door-mounted status devices and an industrial network make pump and fan conditions visible without opening the power sections.
Características clave
A common bus distributes incoming power across aligned vertical sections.
Separated wireways route field cables away from energized bus compartments.
Door-mounted status and local controls remain accessible with the section closed.
Networked protection devices expose current, trip and operating data to plant controls.
Preocupaciones del producto del cliente
A facility with many motors needs centralized protection and visibility without turning one service event into a shutdown of the entire utility system.
Scattered starters make isolation and troubleshooting inconsistent.Standard feeder compartments centralize protection, control and labeling.
Field cables cross buswork and complicate safe maintenance.Dedicated vertical and horizontal wireways segregate cable routes.
One failed starter interrupts adjacent motor controls during repair.Compartmentalized fixed or withdrawable units isolate the affected feeder.
Operators lack early warning before a motor protection trip.Intelligent relays report load, thermal state and trip history over the control network.
Aplicaciones típicas
Air-handling unit motorsChilled-water pump motor feedersExhaust and pressure-control fansClean utility skids
Parámetros técnicos
Typical configurable construction ranges for a motor control center are listed below.
| Materiales Core | Powder-coated steel or stainless sections with copper bus, motor starters, protection relays and segregated wireways |
|---|---|
| Panel de espesor | 400-600 mm cabinet section depth |
| Ancho efectivo | 500-1000 mm per vertical section |
| Longitud máxima | Up to 2400 mm assembled section height |
| Acero frente a espesor | 1.5-2.5 mm section frame, panels and compartment doors |
| Densidad Core | Approximately 7850 kg/m³ for the structural carbon-steel sections |
| Conductividad térmica | 45-60 W/(m·K) for carbon-steel enclosure material |
| Superficie acabada | Light-grey powder-coated sections with black handles and colored feeder status indicators |
| Tipo conjunto | Bolted modular sections with gasketed compartment doors, common bus joints and segregated cable chambers |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Fixed or withdrawable feeder unitsContactor, soft starter or VFD feedersIntelligent motor protection relaysStainless outer enclosure
Planning a Motor Control Center specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
