Complete multi-section motor control center with light-grey compartment doors

Pencahayaan bilik bersih dan peralatan elektrik

Pusat Kawalan Motor

A floor-standing assembly that groups starters, protection, variable-speed drives and feeder controls for multiple cleanroom utility motors.

Compartmentalized Motor Feeders
Common Horizontal Bus
Withdrawable or Fixed Units
Networked Motor Monitoring

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The motor control center combines multiple vertical sections around a common bus and cable system. Each motor feeder can contain isolation, short-circuit protection, contactor or drive, overload relay and control terminals in a dedicated compartment. Door-mounted status devices and an industrial network make pump and fan conditions visible without opening the power sections.

Ciri-ciri Utama

Individual feeder compartments localize service work to one motor circuit.

A common bus distributes incoming power across aligned vertical sections.

Separated wireways route field cables away from energized bus compartments.

Door-mounted status and local controls remain accessible with the section closed.

Networked protection devices expose current, trip and operating data to plant controls.

Kebimbangan Produk Pelanggan

A facility with many motors needs centralized protection and visibility without turning one service event into a shutdown of the entire utility system.

Scattered starters make isolation and troubleshooting inconsistent.Standard feeder compartments centralize protection, control and labeling.

Field cables cross buswork and complicate safe maintenance.Dedicated vertical and horizontal wireways segregate cable routes.

One failed starter interrupts adjacent motor controls during repair.Compartmentalized fixed or withdrawable units isolate the affected feeder.

Operators lack early warning before a motor protection trip.Intelligent relays report load, thermal state and trip history over the control network.

Permohonan yang biasa

Air-handling unit motorsChilled-water pump motor feedersExhaust and pressure-control fansClean utility skids

Parameter teknikal

Typical configurable construction ranges for a motor control center are listed below.

Bahan Teras	Powder-coated steel or stainless sections with copper bus, motor starters, protection relays and segregated wireways
Ketebalan Panel	400-600 mm cabinet section depth
Lebar berkesan	500-1000 mm per vertical section
Panjang maksimum	Up to 2400 mm assembled section height
Keluli Menghadapi Ketebalan	1.5-2.5 mm section frame, panels and compartment doors
Ketumpatan teras	Approximately 7850 kg/m³ for the structural carbon-steel sections
Kekonduksian Terma	45-60 W/(m·K) for carbon-steel enclosure material
Kemasan permukaan	Light-grey powder-coated sections with black handles and colored feeder status indicators
Jenis Bersatu	Bolted modular sections with gasketed compartment doors, common bus joints and segregated cable chambers
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Fixed or withdrawable feeder unitsContactor, soft starter or VFD feedersIntelligent motor protection relaysStainless outer enclosure

Planning a Motor Control Center specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami