Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Beleuchtung und elektrische Ausrüstung
Motor Control Center
A floor-standing assembly that groups starters, protection, variable-speed drives and feeder controls for multiple cleanroom utility motors.
- Compartmentalized Motor Feeders
- Common Horizontal Bus
- Withdrawable or Fixed Units
- Networked Motor Monitoring
Produkteinführung
The motor control center combines multiple vertical sections around a common bus and cable system. Each motor feeder can contain isolation, short-circuit protection, contactor or drive, overload relay and control terminals in a dedicated compartment. Door-mounted status devices and an industrial network make pump and fan conditions visible without opening the power sections.
Key Features
A common bus distributes incoming power across aligned vertical sections.
Separated wireways route field cables away from energized bus compartments.
Door-mounted status and local controls remain accessible with the section closed.
Networked protection devices expose current, trip and operating data to plant controls.
Kunden Produktbedenken
A facility with many motors needs centralized protection and visibility without turning one service event into a shutdown of the entire utility system.
Scattered starters make isolation and troubleshooting inconsistent.Standard feeder compartments centralize protection, control and labeling.
Field cables cross buswork and complicate safe maintenance.Dedicated vertical and horizontal wireways segregate cable routes.
One failed starter interrupts adjacent motor controls during repair.Compartmentalized fixed or withdrawable units isolate the affected feeder.
Operators lack early warning before a motor protection trip.Intelligent relays report load, thermal state and trip history over the control network.
Typische Anwendungen
Air-handling unit motorsChilled-water pump motor feedersExhaust and pressure-control fansClean utility skids
Technische Parameter
Typical configurable construction ranges for a motor control center are listed below.
| Core Material | Powder-coated steel or stainless sections with copper bus, motor starters, protection relays and segregated wireways |
|---|---|
| Panel Dicke | 400-600 mm cabinet section depth |
| Effektive Breite | 500-1000 mm per vertical section |
| Maximale Länge | Up to 2400 mm assembled section height |
| Stahl facing Dicke | 1.5-2.5 mm section frame, panels and compartment doors |
| Kerndichte | Approximately 7850 kg/m³ for the structural carbon-steel sections |
| Thermische Leitfähigkeit | 45-60 W/(m·K) for carbon-steel enclosure material |
| Oberfläche Finish | Light-grey powder-coated sections with black handles and colored feeder status indicators |
| Gemeinsamer Typ | Bolted modular sections with gasketed compartment doors, common bus joints and segregated cable chambers |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Fixed or withdrawable feeder unitsContactor, soft starter or VFD feedersIntelligent motor protection relaysStainless outer enclosure
Planning a Motor Control Center specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
