Complete multi-section motor control center with light-grey compartment doors

클린룸 조명 및 전기 장비

모터 제어 센터

A floor-standing assembly that groups starters, protection, variable-speed drives and feeder controls for multiple cleanroom utility motors.

Compartmentalized Motor Feeders
Common Horizontal Bus
Withdrawable or Fixed Units
Networked Motor Monitoring

견적 요청 제품 찾아보기

상품 소개

The motor control center combines multiple vertical sections around a common bus and cable system. Each motor feeder can contain isolation, short-circuit protection, contactor or drive, overload relay and control terminals in a dedicated compartment. Door-mounted status devices and an industrial network make pump and fan conditions visible without opening the power sections.

주요 기능

Individual feeder compartments localize service work to one motor circuit.

A common bus distributes incoming power across aligned vertical sections.

Separated wireways route field cables away from energized bus compartments.

Door-mounted status and local controls remain accessible with the section closed.

Networked protection devices expose current, trip and operating data to plant controls.

고객 제품 관심사

A facility with many motors needs centralized protection and visibility without turning one service event into a shutdown of the entire utility system.

Scattered starters make isolation and troubleshooting inconsistent.Standard feeder compartments centralize protection, control and labeling.

Field cables cross buswork and complicate safe maintenance.Dedicated vertical and horizontal wireways segregate cable routes.

One failed starter interrupts adjacent motor controls during repair.Compartmentalized fixed or withdrawable units isolate the affected feeder.

Operators lack early warning before a motor protection trip.Intelligent relays report load, thermal state and trip history over the control network.

일반적인 응용 프로그램

Air-handling unit motorsChilled-water pump motor feedersExhaust and pressure-control fansClean utility skids

기술 매개변수

Typical configurable construction ranges for a motor control center are listed below.

핵심 재료	Powder-coated steel or stainless sections with copper bus, motor starters, protection relays and segregated wireways
패널 두께	400-600 mm cabinet section depth
유효 폭	500-1000 mm per vertical section
최대 길이	Up to 2400 mm assembled section height
강철 면면 두께	1.5-2.5 mm section frame, panels and compartment doors
코어 밀도	Approximately 7850 kg/m³ for the structural carbon-steel sections
열전도도 (Thermal Conductivity)	45-60 W/(m·K) for carbon-steel enclosure material
표면 마무리	Light-grey powder-coated sections with black handles and colored feeder status indicators
접합 유형	Bolted modular sections with gasketed compartment doors, common bus joints and segregated cable chambers
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Fixed or withdrawable feeder unitsContactor, soft starter or VFD feedersIntelligent motor protection relaysStainless outer enclosure

Planning a Motor Control Center specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.