Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Carga de materiales Booth
A downflow booth built around a process inlet so bags, drums or lined containers can be emptied into a vessel while released dust is captured locally.
- Process Inlet Integration
- Contained Charging Zone
- Bag and Drum Handling
- Low-Level Dust Return
Introducción del producto
The charging booth surrounds the feed opening of a mixer, reactor, hopper or intermediate vessel. A raised platform, charging chute or flexible connection positions the process inlet within the protected downflow zone. Operators open bags or containers above the inlet while rear or side returns capture displaced dust. Lifts, hoists and empty-bag disposal ports can be integrated so charging steps remain inside one organized enclosure.
Características clave
Flexible or rigid feed interfaces reduce the open gap between container and vessel.
Low return grilles collect dust displaced upward from the receiving vessel.
Hoists or bag lifters can move heavy containers into the charging position.
A dedicated empty-bag port separates waste handling from the product inlet.
Preocupaciones del producto del cliente
Vessel charging releases air and powder from the receiving inlet while operators handle heavy source containers above the process opening.
Displaced air pushes powder back from the vessel inlet.Local returns capture the upward plume around the charging connection.
Heavy bags are lifted manually above shoulder height.An integrated hoist or lifter positions the source container over the inlet.
A wide gap remains between the bag and process chute.A flexible sleeve or inflating-head option closes the transfer interface.
Empty bags carry residue across the booth.A dedicated bag-out or waste port removes them through a separate contained route.
Aplicaciones típicas
Mixer chargingReactor powder additionGranulator ingredient loadingIntermediate hopper filling
Parámetros técnicos
Typical configurable construction ranges for a material charging booth are listed below.
| Materiales Core | SUS304 or SUS316L process-zone panels with mineral-wool insulated outer enclosure and reinforced charging platform |
|---|---|
| Panel de espesor | 75-100 mm insulated booth panels |
| Ancho efectivo | 1800-4500 mm clear charging width |
| Longitud máxima | Up to 6500 mm booth depth |
| Acero frente a espesor | 1.2-2.0 mm stainless process facing; 1.0-1.2 mm outer steel |
| Densidad Core | 100-140 kg/m³ mineral-wool core |
| Conductividad térmica | 0.035-0.045 W/(m·K) for the mineral-wool core |
| Superficie acabada | Fine-brushed stainless process surfaces with sealed powder-coated outer panels |
| Tipo conjunto | Pressure-sealed booth panels with reinforced vessel interface, flexible sleeve or welded charging chute |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Bag lifter or monorail hoistFlexible liner or inflating-head connectionEmpty-bag disposal portOnce-through or recirculating airflow
Planning a Material Charging Booth specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
