Material charging booth integrated around a process vessel inlet

層流 · 封じ込め装置

Material 充電ブース

A downflow booth built around a process inlet so bags, drums or lined containers can be emptied into a vessel while released dust is captured locally.

Process Inlet Integration
Contained Charging Zone
Bag and Drum Handling
Low-Level Dust Return

見積もりリクエスト製品案内

商品紹介

The charging booth surrounds the feed opening of a mixer, reactor, hopper or intermediate vessel. A raised platform, charging chute or flexible connection positions the process inlet within the protected downflow zone. Operators open bags or containers above the inlet while rear or side returns capture displaced dust. Lifts, hoists and empty-bag disposal ports can be integrated so charging steps remain inside one organized enclosure.

主要な特徴

A reinforced floor or platform aligns the booth around the process charging point.

Flexible or rigid feed interfaces reduce the open gap between container and vessel.

Low return grilles collect dust displaced upward from the receiving vessel.

Hoists or bag lifters can move heavy containers into the charging position.

A dedicated empty-bag port separates waste handling from the product inlet.

お客様の製品に関する懸念事項

Vessel charging releases air and powder from the receiving inlet while operators handle heavy source containers above the process opening.

Displaced air pushes powder back from the vessel inlet.Local returns capture the upward plume around the charging connection.

Heavy bags are lifted manually above shoulder height.An integrated hoist or lifter positions the source container over the inlet.

A wide gap remains between the bag and process chute.A flexible sleeve or inflating-head option closes the transfer interface.

Empty bags carry residue across the booth.A dedicated bag-out or waste port removes them through a separate contained route.

典型的な用途

Mixer chargingReactor powder additionGranulator ingredient loadingIntermediate hopper filling

技術的なパラメータ

Typical configurable construction ranges for a material charging booth are listed below.

コア材料	SUS304 or SUS316L process-zone panels with mineral-wool insulated outer enclosure and reinforced charging platform
パネルの厚さ	75-100 mm insulated booth panels
有効幅	1800-4500 mm clear charging width
最大長さ	Up to 6500 mm booth depth
鋼鉄の厚さを直面する	1.2-2.0 mm stainless process facing; 1.0-1.2 mm outer steel
コア密度	100-140 kg/m³ mineral-wool core
熱伝導率	ミネラルウールコアのための 0.035 — 0.045 W / （ m · K ）
表面仕上げ	Fine-brushed stainless process surfaces with sealed powder-coated outer panels
ジョイントタイプ	Pressure-sealed booth panels with reinforced vessel interface, flexible sleeve or welded charging chute
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Bag lifter or monorail hoistFlexible liner or inflating-head connectionEmpty-bag disposal portOnce-through or recirculating airflow

Planning a Material Charging Booth specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する