Material charging booth integrated around a process vessel inlet

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

재료 충전 부스

A downflow booth built around a process inlet so bags, drums or lined containers can be emptied into a vessel while released dust is captured locally.

Process Inlet Integration
Contained Charging Zone
Bag and Drum Handling
Low-Level Dust Return

견적 요청 제품 찾아보기

상품 소개

The charging booth surrounds the feed opening of a mixer, reactor, hopper or intermediate vessel. A raised platform, charging chute or flexible connection positions the process inlet within the protected downflow zone. Operators open bags or containers above the inlet while rear or side returns capture displaced dust. Lifts, hoists and empty-bag disposal ports can be integrated so charging steps remain inside one organized enclosure.

주요 기능

A reinforced floor or platform aligns the booth around the process charging point.

Flexible or rigid feed interfaces reduce the open gap between container and vessel.

Low return grilles collect dust displaced upward from the receiving vessel.

Hoists or bag lifters can move heavy containers into the charging position.

A dedicated empty-bag port separates waste handling from the product inlet.

고객 제품 관심사

Vessel charging releases air and powder from the receiving inlet while operators handle heavy source containers above the process opening.

Displaced air pushes powder back from the vessel inlet.Local returns capture the upward plume around the charging connection.

Heavy bags are lifted manually above shoulder height.An integrated hoist or lifter positions the source container over the inlet.

A wide gap remains between the bag and process chute.A flexible sleeve or inflating-head option closes the transfer interface.

Empty bags carry residue across the booth.A dedicated bag-out or waste port removes them through a separate contained route.

일반적인 응용 프로그램

Mixer chargingReactor powder additionGranulator ingredient loadingIntermediate hopper filling

기술 매개변수

Typical configurable construction ranges for a material charging booth are listed below.

핵심 재료	SUS304 or SUS316L process-zone panels with mineral-wool insulated outer enclosure and reinforced charging platform
패널 두께	75-100 mm insulated booth panels
유효 폭	1800-4500 mm clear charging width
최대 길이	Up to 6500 mm booth depth
강철 면면 두께	1.2-2.0 mm stainless process facing; 1.0-1.2 mm outer steel
코어 밀도	100-140 kg/m³ mineral-wool core
열전도도 (Thermal Conductivity)	미네랄 울 코어용 0. 035 - 0. 045 W / (m · K)
표면 마무리	Fine-brushed stainless process surfaces with sealed powder-coated outer panels
접합 유형	Pressure-sealed booth panels with reinforced vessel interface, flexible sleeve or welded charging chute
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Bag lifter or monorail hoistFlexible liner or inflating-head connectionEmpty-bag disposal portOnce-through or recirculating airflow

Planning a Material Charging Booth specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.