Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Laminar Flow und Containment Equipment
Material Lade-Booth
A downflow booth built around a process inlet so bags, drums or lined containers can be emptied into a vessel while released dust is captured locally.
- Process Inlet Integration
- Contained Charging Zone
- Bag and Drum Handling
- Low-Level Dust Return
Produkteinführung
The charging booth surrounds the feed opening of a mixer, reactor, hopper or intermediate vessel. A raised platform, charging chute or flexible connection positions the process inlet within the protected downflow zone. Operators open bags or containers above the inlet while rear or side returns capture displaced dust. Lifts, hoists and empty-bag disposal ports can be integrated so charging steps remain inside one organized enclosure.
Key Features
Flexible or rigid feed interfaces reduce the open gap between container and vessel.
Low return grilles collect dust displaced upward from the receiving vessel.
Hoists or bag lifters can move heavy containers into the charging position.
A dedicated empty-bag port separates waste handling from the product inlet.
Kunden Produktbedenken
Vessel charging releases air and powder from the receiving inlet while operators handle heavy source containers above the process opening.
Displaced air pushes powder back from the vessel inlet.Local returns capture the upward plume around the charging connection.
Heavy bags are lifted manually above shoulder height.An integrated hoist or lifter positions the source container over the inlet.
A wide gap remains between the bag and process chute.A flexible sleeve or inflating-head option closes the transfer interface.
Empty bags carry residue across the booth.A dedicated bag-out or waste port removes them through a separate contained route.
Typische Anwendungen
Mixer chargingReactor powder additionGranulator ingredient loadingIntermediate hopper filling
Technische Parameter
Typical configurable construction ranges for a material charging booth are listed below.
| Core Material | SUS304 or SUS316L process-zone panels with mineral-wool insulated outer enclosure and reinforced charging platform |
|---|---|
| Panel Dicke | 75-100 mm insulated booth panels |
| Effektive Breite | 1800-4500 mm clear charging width |
| Maximale Länge | Up to 6500 mm booth depth |
| Stahl facing Dicke | 1.2-2.0 mm stainless process facing; 1.0-1.2 mm outer steel |
| Kerndichte | 100-140 kg/m³ mineral-wool core |
| Thermische Leitfähigkeit | 0,035 - 0,045 W / (m · K) für den Mineralwollkern |
| Oberfläche Finish | Fine-brushed stainless process surfaces with sealed powder-coated outer panels |
| Gemeinsamer Typ | Pressure-sealed booth panels with reinforced vessel interface, flexible sleeve or welded charging chute |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Bag lifter or monorail hoistFlexible liner or inflating-head connectionEmpty-bag disposal portOnce-through or recirculating airflow
Planning a Material Charging Booth specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
