Material charging booth integrated around a process vessel inlet

Aliran Laminar dan Peralatan Pengekangan

Bahan Pengecasan Booth

A downflow booth built around a process inlet so bags, drums or lined containers can be emptied into a vessel while released dust is captured locally.

Process Inlet Integration
Contained Charging Zone
Bag and Drum Handling
Low-Level Dust Return

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The charging booth surrounds the feed opening of a mixer, reactor, hopper or intermediate vessel. A raised platform, charging chute or flexible connection positions the process inlet within the protected downflow zone. Operators open bags or containers above the inlet while rear or side returns capture displaced dust. Lifts, hoists and empty-bag disposal ports can be integrated so charging steps remain inside one organized enclosure.

Ciri-ciri Utama

A reinforced floor or platform aligns the booth around the process charging point.

Flexible or rigid feed interfaces reduce the open gap between container and vessel.

Low return grilles collect dust displaced upward from the receiving vessel.

Hoists or bag lifters can move heavy containers into the charging position.

A dedicated empty-bag port separates waste handling from the product inlet.

Kebimbangan Produk Pelanggan

Vessel charging releases air and powder from the receiving inlet while operators handle heavy source containers above the process opening.

Displaced air pushes powder back from the vessel inlet.Local returns capture the upward plume around the charging connection.

Heavy bags are lifted manually above shoulder height.An integrated hoist or lifter positions the source container over the inlet.

A wide gap remains between the bag and process chute.A flexible sleeve or inflating-head option closes the transfer interface.

Empty bags carry residue across the booth.A dedicated bag-out or waste port removes them through a separate contained route.

Permohonan yang biasa

Mixer chargingReactor powder additionGranulator ingredient loadingIntermediate hopper filling

Parameter teknikal

Typical configurable construction ranges for a material charging booth are listed below.

Bahan Teras	SUS304 or SUS316L process-zone panels with mineral-wool insulated outer enclosure and reinforced charging platform
Ketebalan Panel	75-100 mm insulated booth panels
Lebar berkesan	1800-4500 mm clear charging width
Panjang maksimum	Up to 6500 mm booth depth
Keluli Menghadapi Ketebalan	1.2-2.0 mm stainless process facing; 1.0-1.2 mm outer steel
Ketumpatan teras	100-140 kg/m³ mineral-wool core
Kekonduksian Terma	0.035-0.045 W/(m·K) for the mineral-wool core
Kemasan permukaan	Fine-brushed stainless process surfaces with sealed powder-coated outer panels
Jenis Bersatu	Pressure-sealed booth panels with reinforced vessel interface, flexible sleeve or welded charging chute
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Bag lifter or monorail hoistFlexible liner or inflating-head connectionEmpty-bag disposal portOnce-through or recirculating airflow

Planning a Material Charging Booth specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami