English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Утилитарные системы для чистых помещений
WFI Distribution Loop
An insulated hygienic circulation skid for maintaining WFI flow and temperature through a hot storage-and-distribution network.
- Insulated continuous hot circulation
- Drainable low-hold-up user branches
- Integrated thermal control and sanitization interface
Введение продукции
This WFI distribution module combines a hygienic circulation pump, insulated supply and return headers, thermal-control exchanger and short point-of-use branches on one open skid. Continuous return flow and measured temperature support the selected hot-storage or periodic thermal-sanitization strategy while keeping serviceable components accessible.
Основные характеристики
Insulated supply and return headers
Hygienic centrifugal circulation pump
Drainable point-of-use branch geometry
Loop heat exchanger with isolated utility circuit
Temperature, pressure and conductivity monitoring
Automated steam or hot-water control interface
Local cabinet for pump and sanitization sequences
Обеспокоенность клиентов продуктами
A WFI network must sustain circulation and controlled temperature without creating cool pockets, long branches or difficult-to-drain utility interfaces.
Return temperature falls at remote usersSize insulation, circulation flow and loop heat exchange from the full hydraulic and heat-loss profile.
Point-of-use branches cool during standbyUse compact continuously swept or recirculating branch arrangements with drainable hygienic valves close to the main header.
Thermal sanitization is unevenSequence pump speed and heat input from measured supply and return temperatures while verifying circulation through each defined path.
Utility leakage could contact WFISelect a leak-detectable double-tube-sheet exchanger or another isolated thermal interface suited to the operating strategy.
Типичные приложения
Aseptic filling facilitiesParenteral formulation suitesVaccine and biologics manufacturingSterile equipment rinse utilitiesHigh-purity compounding areas
Технические параметры
The loop skid is configured around storage temperature, return-temperature target, distribution length, peak demand and sanitization method.
| Основной материал | 316L stainless steel product-contact tubing, fittings, valve bodies, pump and exchanger surfaces |
|---|---|
| Толщина панели | Control cabinet and skid sheet components typically 1.5–3.0 mm |
| эффективная ширина | Packaged hot-loop skid width typically 1200–2600 mm |
| Максимальная длина | Packaged distribution module length typically up to 4500 mm |
| Толщина линий стали | Stainless insulation cladding and cabinet facing typically 0.8–2.0 mm |
| Плотность ядра | 316L stainless steel density approximately 8000 kg/m³ |
| Теплопроводимость | Typical hygienic insulation system approximately 0.035–0.045 W/(m·K) |
| Поверхностная отделка | Polished or electropolished wetted surfaces with cleanable satin stainless insulation cladding |
| Объединенный тип | Orbital-welded main tubing with drainable sanitary service connections |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Duty and standby pumpsDouble-tube-sheet loop heat exchangerSteam or hot-water heating interfaceContinuously swept point-of-use subloopsReturn conductivity and TOC monitoringAutomated thermal-sanitization sequenceInsulated valve jacketsRemote data and alarm integration
Planning a WFI Distribution Loop specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
