日本語
ドイツ人。
アラビア語：アラビア語
フランス語で
インドネシア語
日本語で。流れ
韓国語
マレー語
ポルトガル語
ロシア語
スペイン語
タイ語
トルコ語
ベトナム語
商品紹介
This WFI distribution module combines a hygienic circulation pump, insulated supply and return headers, thermal-control exchanger and short point-of-use branches on one open skid. Continuous return flow and measured temperature support the selected hot-storage or periodic thermal-sanitization strategy while keeping serviceable components accessible.
主要な特徴
Insulated supply and return headers
Hygienic centrifugal circulation pump
Drainable point-of-use branch geometry
Loop heat exchanger with isolated utility circuit
Temperature, pressure and conductivity monitoring
Automated steam or hot-water control interface
Local cabinet for pump and sanitization sequences
お客様の製品に関する懸念事項
A WFI network must sustain circulation and controlled temperature without creating cool pockets, long branches or difficult-to-drain utility interfaces.
Return temperature falls at remote usersSize insulation, circulation flow and loop heat exchange from the full hydraulic and heat-loss profile.
Point-of-use branches cool during standbyUse compact continuously swept or recirculating branch arrangements with drainable hygienic valves close to the main header.
Thermal sanitization is unevenSequence pump speed and heat input from measured supply and return temperatures while verifying circulation through each defined path.
Utility leakage could contact WFISelect a leak-detectable double-tube-sheet exchanger or another isolated thermal interface suited to the operating strategy.
典型的な用途
Aseptic filling facilitiesParenteral formulation suitesVaccine and biologics manufacturingSterile equipment rinse utilitiesHigh-purity compounding areas
技術的なパラメータ
The loop skid is configured around storage temperature, return-temperature target, distribution length, peak demand and sanitization method.
| コア材料 | 316L stainless steel product-contact tubing, fittings, valve bodies, pump and exchanger surfaces |
|---|---|
| パネルの厚さ | Control cabinet and skid sheet components typically 1.5–3.0 mm |
| 有効幅 | Packaged hot-loop skid width typically 1200–2600 mm |
| 最大長さ | Packaged distribution module length typically up to 4500 mm |
| 鋼鉄の厚さを直面する | Stainless insulation cladding and cabinet facing typically 0.8–2.0 mm |
| コア密度 | 316L stainless steel density approximately 8000 kg/m³ |
| 熱伝導率 | Typical hygienic insulation system approximately 0.035–0.045 W/(m·K) |
| 表面仕上げ | Polished or electropolished wetted surfaces with cleanable satin stainless insulation cladding |
| ジョイントタイプ | Orbital-welded main tubing with drainable sanitary service connections |
| カスタマイズ | 意図したアプリケーションと動作環境に基づいて利用できます。 |
利用可能なオプション
Duty and standby pumpsDouble-tube-sheet loop heat exchangerSteam or hot-water heating interfaceContinuously swept point-of-use subloopsReturn conductivity and TOC monitoringAutomated thermal-sanitization sequenceInsulated valve jacketsRemote data and alarm integration
Planning a WFI Distribution Loop specification?
寸法、設置条件、性能目標、必要な表面仕上げをお送りください。
