Insulated WFI distribution loop skid three-quarter view

Sistem Utiliti Bilik Bersih

Gulung Pengedaran WFI

An insulated hygienic circulation skid for maintaining WFI flow and temperature through a hot storage-and-distribution network.

Insulated continuous hot circulation
Drainable low-hold-up user branches
Integrated thermal control and sanitization interface

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

This WFI distribution module combines a hygienic circulation pump, insulated supply and return headers, thermal-control exchanger and short point-of-use branches on one open skid. Continuous return flow and measured temperature support the selected hot-storage or periodic thermal-sanitization strategy while keeping serviceable components accessible.

Ciri-ciri Utama

316L stainless product-contact tubing

Insulated supply and return headers

Hygienic centrifugal circulation pump

Drainable point-of-use branch geometry

Loop heat exchanger with isolated utility circuit

Temperature, pressure and conductivity monitoring

Automated steam or hot-water control interface

Local cabinet for pump and sanitization sequences

Kebimbangan Produk Pelanggan

A WFI network must sustain circulation and controlled temperature without creating cool pockets, long branches or difficult-to-drain utility interfaces.

Return temperature falls at remote usersSize insulation, circulation flow and loop heat exchange from the full hydraulic and heat-loss profile.

Point-of-use branches cool during standbyUse compact continuously swept or recirculating branch arrangements with drainable hygienic valves close to the main header.

Thermal sanitization is unevenSequence pump speed and heat input from measured supply and return temperatures while verifying circulation through each defined path.

Utility leakage could contact WFISelect a leak-detectable double-tube-sheet exchanger or another isolated thermal interface suited to the operating strategy.

Permohonan yang biasa

Aseptic filling facilitiesParenteral formulation suitesVaccine and biologics manufacturingSterile equipment rinse utilitiesHigh-purity compounding areas

Parameter teknikal

The loop skid is configured around storage temperature, return-temperature target, distribution length, peak demand and sanitization method.

Bahan Teras	316L stainless steel product-contact tubing, fittings, valve bodies, pump and exchanger surfaces
Ketebalan Panel	Control cabinet and skid sheet components typically 1.5–3.0 mm
Lebar berkesan	Packaged hot-loop skid width typically 1200–2600 mm
Panjang maksimum	Packaged distribution module length typically up to 4500 mm
Keluli Menghadapi Ketebalan	Stainless insulation cladding and cabinet facing typically 0.8–2.0 mm
Ketumpatan teras	316L stainless steel density approximately 8000 kg/m³
Kekonduksian Terma	Typical hygienic insulation system approximately 0.035–0.045 W/(m·K)
Kemasan permukaan	Polished or electropolished wetted surfaces with cleanable satin stainless insulation cladding
Jenis Bersatu	Orbital-welded main tubing with drainable sanitary service connections
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Duty and standby pumpsDouble-tube-sheet loop heat exchangerSteam or hot-water heating interfaceContinuously swept point-of-use subloopsReturn conductivity and TOC monitoringAutomated thermal-sanitization sequenceInsulated valve jacketsRemote data and alarm integration

Planning a WFI Distribution Loop specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami