Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
Sistem Utilitas Cleanroom
WFI Distribusi Loop
An insulated hygienic circulation skid for maintaining WFI flow and temperature through a hot storage-and-distribution network.
- Insulated continuous hot circulation
- Drainable low-hold-up user branches
- Integrated thermal control and sanitization interface
Perkenalan produk
This WFI distribution module combines a hygienic circulation pump, insulated supply and return headers, thermal-control exchanger and short point-of-use branches on one open skid. Continuous return flow and measured temperature support the selected hot-storage or periodic thermal-sanitization strategy while keeping serviceable components accessible.
Fitur utama:
Insulated supply and return headers
Hygienic centrifugal circulation pump
Drainable point-of-use branch geometry
Loop heat exchanger with isolated utility circuit
Temperature, pressure and conductivity monitoring
Automated steam or hot-water control interface
Local cabinet for pump and sanitization sequences
Kekhawatiran produk pelanggan
A WFI network must sustain circulation and controlled temperature without creating cool pockets, long branches or difficult-to-drain utility interfaces.
Return temperature falls at remote usersSize insulation, circulation flow and loop heat exchange from the full hydraulic and heat-loss profile.
Point-of-use branches cool during standbyUse compact continuously swept or recirculating branch arrangements with drainable hygienic valves close to the main header.
Thermal sanitization is unevenSequence pump speed and heat input from measured supply and return temperatures while verifying circulation through each defined path.
Utility leakage could contact WFISelect a leak-detectable double-tube-sheet exchanger or another isolated thermal interface suited to the operating strategy.
Aplikasi yang Tipis
Aseptic filling facilitiesParenteral formulation suitesVaccine and biologics manufacturingSterile equipment rinse utilitiesHigh-purity compounding areas
Parameter teknis
The loop skid is configured around storage temperature, return-temperature target, distribution length, peak demand and sanitization method.
| Bahan inti | 316L stainless steel product-contact tubing, fittings, valve bodies, pump and exchanger surfaces |
|---|---|
| Ketebalan Panel (Panel Thickness) | Control cabinet and skid sheet components typically 1.5–3.0 mm |
| Efektif lebar | Packaged hot-loop skid width typically 1200–2600 mm |
| Panjang maksimum | Packaged distribution module length typically up to 4500 mm |
| Baja menghadap ketebalan | Stainless insulation cladding and cabinet facing typically 0.8–2.0 mm |
| Kepadatan inti (core density) | 316L stainless steel kepadatan sekitar 8000 kg / m3 |
| Konduktivitas Termal (Thermal Conductivity) | Typical hygienic insulation system approximately 0.035–0.045 W/(m·K) |
| Permukaan selesai | Polished or electropolished wetted surfaces with cleanable satin stainless insulation cladding |
| Jenis Bersama | Orbital-welded main tubing with drainable sanitary service connections |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Duty and standby pumpsDouble-tube-sheet loop heat exchangerSteam or hot-water heating interfaceContinuously swept point-of-use subloopsReturn conductivity and TOC monitoringAutomated thermal-sanitization sequenceInsulated valve jacketsRemote data and alarm integration
Planning a WFI Distribution Loop specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
