English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
УФУ и терминальное оборудование для очистки воздуха
Мобильный вентилятор фильтра
A wheeled clean-air module with an onboard EC fan and HEPA or ULPA filter that can be positioned beside changing production or maintenance work.
- Locking Cleanroom Casters
- Battery-Ready EC Drive
- Compact Wheeled Base
- Adjustable Horizontal Supply
Введение продукции
The mobile fan filter unit integrates a compact filtered-air cabinet, a protected electrical compartment and four non-marking cleanroom casters on one narrow trolley. A full-face diffuser supplies horizontal filtered air, while side handles and a low centre of gravity support controlled movement between workstations. The EC drive can operate from mains power or an optional low-voltage battery pack, allowing short-duration use where a cable would obstruct personnel or material flow. Brakes on two or four casters hold the module steady once the outlet is aligned with the protected operation.
Основные характеристики
A low-mounted battery compartment keeps the centre of gravity below the elevated filter face.
Recessed handles reduce contact with the diffuser and simplify controlled repositioning by one operator.
Variable EC speed permits the horizontal airflow to be reduced for close work or increased for a larger zone.
Обеспокоенность клиентов продуктами
Temporary critical work needs a clean-air source that can move safely without sacrificing outlet stability or introducing a trailing-cable hazard.
A fixed FFU cannot follow maintenance work that moves between several tools.The caster-mounted cabinet can be rolled to the active location and locked in position.
A high filter module on a narrow cart can become unstable during turning.The battery and electrical mass sit low in a wide wheelbase to resist tipping.
Trailing mains leads cross operator aisles during short-duration interventions.An optional battery pack supports cordless operation for defined mobile work periods.
Uncontrolled wheels allow the clean-air face to drift away from the target process.Positive caster brakes secure the selected outlet position before work begins.
Типичные приложения
Temporary aseptic interventionsEquipment maintenance protectionMobile electronics assemblySampling and inspection pointsEmergency local clean-air support
Технические параметры
Representative construction ranges for a mobile horizontal-flow FFU are listed below.
| Основной материал | EC centrifugal fan, micro-glass HEPA or ULPA pack and powder-coated steel mobile chassis |
|---|---|
| Толщина панели | 420-650 mm cabinet depth including wheelbase |
| эффективная ширина | 610-1220 mm active filter-face width |
| Максимальная длина | Up to 1800 mm overall mobile unit height |
| Толщина линий стали | 1.0-1.5 mm cabinet sheet with 2.0-3.0 mm structural base plate |
| Плотность ядра | Approximately 90-120 kg/m³ compacted density of the final-filter pack |
| Теплопроводимость | Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack carried by the mobile FFU |
| Поверхностная отделка | White low-shedding powder coat with blue handles and grey non-marking caster tyres |
| Объединенный тип | Gasketed service door and compression-seal filter frame on a welded caster base |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Mains-only or rechargeable battery-ready supplyHEPA H14 or ULPA U15 filterTwo-wheel or four-wheel brake setAdjustable-height discharge frame
Planning a Mobile Fan Filter Unit specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
