Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
FFU und Terminalluftreinigungsanlagen
Mobile Fan Filter Einheit
A wheeled clean-air module with an onboard EC fan and HEPA or ULPA filter that can be positioned beside changing production or maintenance work.
- Locking Cleanroom Casters
- Battery-Ready EC Drive
- Compact Wheeled Base
- Adjustable Horizontal Supply
Produkteinführung
The mobile fan filter unit integrates a compact filtered-air cabinet, a protected electrical compartment and four non-marking cleanroom casters on one narrow trolley. A full-face diffuser supplies horizontal filtered air, while side handles and a low centre of gravity support controlled movement between workstations. The EC drive can operate from mains power or an optional low-voltage battery pack, allowing short-duration use where a cable would obstruct personnel or material flow. Brakes on two or four casters hold the module steady once the outlet is aligned with the protected operation.
Key Features
A low-mounted battery compartment keeps the centre of gravity below the elevated filter face.
Recessed handles reduce contact with the diffuser and simplify controlled repositioning by one operator.
Variable EC speed permits the horizontal airflow to be reduced for close work or increased for a larger zone.
Kunden Produktbedenken
Temporary critical work needs a clean-air source that can move safely without sacrificing outlet stability or introducing a trailing-cable hazard.
A fixed FFU cannot follow maintenance work that moves between several tools.The caster-mounted cabinet can be rolled to the active location and locked in position.
A high filter module on a narrow cart can become unstable during turning.The battery and electrical mass sit low in a wide wheelbase to resist tipping.
Trailing mains leads cross operator aisles during short-duration interventions.An optional battery pack supports cordless operation for defined mobile work periods.
Uncontrolled wheels allow the clean-air face to drift away from the target process.Positive caster brakes secure the selected outlet position before work begins.
Typische Anwendungen
Temporary aseptic interventionsEquipment maintenance protectionMobile electronics assemblySampling and inspection pointsEmergency local clean-air support
Technische Parameter
Representative construction ranges for a mobile horizontal-flow FFU are listed below.
| Core Material | EC centrifugal fan, micro-glass HEPA or ULPA pack and powder-coated steel mobile chassis |
|---|---|
| Panel Dicke | 420-650 mm cabinet depth including wheelbase |
| Effektive Breite | 610-1220 mm active filter-face width |
| Maximale Länge | Up to 1800 mm overall mobile unit height |
| Stahl facing Dicke | 1.0-1.5 mm cabinet sheet with 2.0-3.0 mm structural base plate |
| Kerndichte | Approximately 90-120 kg/m³ compacted density of the final-filter pack |
| Thermische Leitfähigkeit | Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack carried by the mobile FFU |
| Oberfläche Finish | White low-shedding powder coat with blue handles and grey non-marking caster tyres |
| Gemeinsamer Typ | Gasketed service door and compression-seal filter frame on a welded caster base |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Mains-only or rechargeable battery-ready supplyHEPA H14 or ULPA U15 filterTwo-wheel or four-wheel brake setAdjustable-height discharge frame
Planning a Mobile Fan Filter Unit specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
