Three-quarter view of a white and blue mobile fan filter unit on four locking casters

FFU dan Peralatan Penulenan Udara Terminal

Unit Penapis Kipas Mudah Alih

A wheeled clean-air module with an onboard EC fan and HEPA or ULPA filter that can be positioned beside changing production or maintenance work.

Locking Cleanroom Casters
Battery-Ready EC Drive
Compact Wheeled Base
Adjustable Horizontal Supply

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The mobile fan filter unit integrates a compact filtered-air cabinet, a protected electrical compartment and four non-marking cleanroom casters on one narrow trolley. A full-face diffuser supplies horizontal filtered air, while side handles and a low centre of gravity support controlled movement between workstations. The EC drive can operate from mains power or an optional low-voltage battery pack, allowing short-duration use where a cable would obstruct personnel or material flow. Brakes on two or four casters hold the module steady once the outlet is aligned with the protected operation.

Ciri-ciri Utama

Non-marking swivel casters allow the clean-air source to follow changing assembly or maintenance activities.

A low-mounted battery compartment keeps the centre of gravity below the elevated filter face.

Recessed handles reduce contact with the diffuser and simplify controlled repositioning by one operator.

Variable EC speed permits the horizontal airflow to be reduced for close work or increased for a larger zone.

Kebimbangan Produk Pelanggan

Temporary critical work needs a clean-air source that can move safely without sacrificing outlet stability or introducing a trailing-cable hazard.

A fixed FFU cannot follow maintenance work that moves between several tools.The caster-mounted cabinet can be rolled to the active location and locked in position.

A high filter module on a narrow cart can become unstable during turning.The battery and electrical mass sit low in a wide wheelbase to resist tipping.

Trailing mains leads cross operator aisles during short-duration interventions.An optional battery pack supports cordless operation for defined mobile work periods.

Uncontrolled wheels allow the clean-air face to drift away from the target process.Positive caster brakes secure the selected outlet position before work begins.

Permohonan yang biasa

Temporary aseptic interventionsEquipment maintenance protectionMobile electronics assemblySampling and inspection pointsEmergency local clean-air support

Parameter teknikal

Representative construction ranges for a mobile horizontal-flow FFU are listed below.

Bahan Teras	EC centrifugal fan, micro-glass HEPA or ULPA pack and powder-coated steel mobile chassis
Ketebalan Panel	420-650 mm cabinet depth including wheelbase
Lebar berkesan	610-1220 mm active filter-face width
Panjang maksimum	Up to 1800 mm overall mobile unit height
Keluli Menghadapi Ketebalan	1.0-1.5 mm cabinet sheet with 2.0-3.0 mm structural base plate
Ketumpatan teras	Approximately 90-120 kg/m³ compacted density of the final-filter pack
Kekonduksian Terma	Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack carried by the mobile FFU
Kemasan permukaan	White low-shedding powder coat with blue handles and grey non-marking caster tyres
Jenis Bersatu	Gasketed service door and compression-seal filter frame on a welded caster base
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Mains-only or rechargeable battery-ready supplyHEPA H14 or ULPA U15 filterTwo-wheel or four-wheel brake setAdjustable-height discharge frame

Planning a Mobile Fan Filter Unit specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami