Three-quarter view of a white and blue mobile fan filter unit on four locking casters

FFU 및 터미널 공기 정화 장비

모바일 팬 필터 유닛

A wheeled clean-air module with an onboard EC fan and HEPA or ULPA filter that can be positioned beside changing production or maintenance work.

Locking Cleanroom Casters
Battery-Ready EC Drive
Compact Wheeled Base
Adjustable Horizontal Supply

견적 요청 제품 찾아보기

상품 소개

The mobile fan filter unit integrates a compact filtered-air cabinet, a protected electrical compartment and four non-marking cleanroom casters on one narrow trolley. A full-face diffuser supplies horizontal filtered air, while side handles and a low centre of gravity support controlled movement between workstations. The EC drive can operate from mains power or an optional low-voltage battery pack, allowing short-duration use where a cable would obstruct personnel or material flow. Brakes on two or four casters hold the module steady once the outlet is aligned with the protected operation.

주요 기능

Non-marking swivel casters allow the clean-air source to follow changing assembly or maintenance activities.

A low-mounted battery compartment keeps the centre of gravity below the elevated filter face.

Recessed handles reduce contact with the diffuser and simplify controlled repositioning by one operator.

Variable EC speed permits the horizontal airflow to be reduced for close work or increased for a larger zone.

고객 제품 관심사

Temporary critical work needs a clean-air source that can move safely without sacrificing outlet stability or introducing a trailing-cable hazard.

A fixed FFU cannot follow maintenance work that moves between several tools.The caster-mounted cabinet can be rolled to the active location and locked in position.

A high filter module on a narrow cart can become unstable during turning.The battery and electrical mass sit low in a wide wheelbase to resist tipping.

Trailing mains leads cross operator aisles during short-duration interventions.An optional battery pack supports cordless operation for defined mobile work periods.

Uncontrolled wheels allow the clean-air face to drift away from the target process.Positive caster brakes secure the selected outlet position before work begins.

일반적인 응용 프로그램

Temporary aseptic interventionsEquipment maintenance protectionMobile electronics assemblySampling and inspection pointsEmergency local clean-air support

기술 매개변수

Representative construction ranges for a mobile horizontal-flow FFU are listed below.

핵심 재료	EC centrifugal fan, micro-glass HEPA or ULPA pack and powder-coated steel mobile chassis
패널 두께	420-650 mm cabinet depth including wheelbase
유효 폭	610-1220 mm active filter-face width
최대 길이	Up to 1800 mm overall mobile unit height
강철 면면 두께	1.0-1.5 mm cabinet sheet with 2.0-3.0 mm structural base plate
코어 밀도	Approximately 90-120 kg/m³ compacted density of the final-filter pack
열전도도 (Thermal Conductivity)	Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack carried by the mobile FFU
표면 마무리	White low-shedding powder coat with blue handles and grey non-marking caster tyres
접합 유형	Gasketed service door and compression-seal filter frame on a welded caster base
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Mains-only or rechargeable battery-ready supplyHEPA H14 or ULPA U15 filterTwo-wheel or four-wheel brake setAdjustable-height discharge frame

Planning a Mobile Fan Filter Unit specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.