Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
FFU y equipos de purificación de aire terminal
Unidad de filtro de ventilador móvil
A wheeled clean-air module with an onboard EC fan and HEPA or ULPA filter that can be positioned beside changing production or maintenance work.
- Locking Cleanroom Casters
- Battery-Ready EC Drive
- Compact Wheeled Base
- Adjustable Horizontal Supply
Introducción del producto
The mobile fan filter unit integrates a compact filtered-air cabinet, a protected electrical compartment and four non-marking cleanroom casters on one narrow trolley. A full-face diffuser supplies horizontal filtered air, while side handles and a low centre of gravity support controlled movement between workstations. The EC drive can operate from mains power or an optional low-voltage battery pack, allowing short-duration use where a cable would obstruct personnel or material flow. Brakes on two or four casters hold the module steady once the outlet is aligned with the protected operation.
Características clave
A low-mounted battery compartment keeps the centre of gravity below the elevated filter face.
Recessed handles reduce contact with the diffuser and simplify controlled repositioning by one operator.
Variable EC speed permits the horizontal airflow to be reduced for close work or increased for a larger zone.
Preocupaciones del producto del cliente
Temporary critical work needs a clean-air source that can move safely without sacrificing outlet stability or introducing a trailing-cable hazard.
A fixed FFU cannot follow maintenance work that moves between several tools.The caster-mounted cabinet can be rolled to the active location and locked in position.
A high filter module on a narrow cart can become unstable during turning.The battery and electrical mass sit low in a wide wheelbase to resist tipping.
Trailing mains leads cross operator aisles during short-duration interventions.An optional battery pack supports cordless operation for defined mobile work periods.
Uncontrolled wheels allow the clean-air face to drift away from the target process.Positive caster brakes secure the selected outlet position before work begins.
Aplicaciones típicas
Temporary aseptic interventionsEquipment maintenance protectionMobile electronics assemblySampling and inspection pointsEmergency local clean-air support
Parámetros técnicos
Representative construction ranges for a mobile horizontal-flow FFU are listed below.
| Materiales Core | EC centrifugal fan, micro-glass HEPA or ULPA pack and powder-coated steel mobile chassis |
|---|---|
| Panel de espesor | 420-650 mm cabinet depth including wheelbase |
| Ancho efectivo | 610-1220 mm active filter-face width |
| Longitud máxima | Up to 1800 mm overall mobile unit height |
| Acero frente a espesor | 1.0-1.5 mm cabinet sheet with 2.0-3.0 mm structural base plate |
| Densidad Core | Approximately 90-120 kg/m³ compacted density of the final-filter pack |
| Conductividad térmica | Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack carried by the mobile FFU |
| Superficie acabada | White low-shedding powder coat with blue handles and grey non-marking caster tyres |
| Tipo conjunto | Gasketed service door and compression-seal filter frame on a welded caster base |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Mains-only or rechargeable battery-ready supplyHEPA H14 or ULPA U15 filterTwo-wheel or four-wheel brake setAdjustable-height discharge frame
Planning a Mobile Fan Filter Unit specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
