Bahasa Inggris
Bahasa Jerman
Bahasa Arab
Bahasa Perancis: Bahasa Perancis
Bahasa IndonesiaSaat ini
Bahasa Jepang
Bahasa Korea
Bahasa Melayu
Bahasa Portugis
Bahasa Rusia
Bahasa Spanyol
Bahasa Thailand
Bahasa Turki
Bahasa Vietnam
FFU dan Peralatan Pemurnian Udara Terminal
Unit Filter Kipas Ponsel
A wheeled clean-air module with an onboard EC fan and HEPA or ULPA filter that can be positioned beside changing production or maintenance work.
- Locking Cleanroom Casters
- Battery-Ready EC Drive
- Compact Wheeled Base
- Adjustable Horizontal Supply
Perkenalan produk
The mobile fan filter unit integrates a compact filtered-air cabinet, a protected electrical compartment and four non-marking cleanroom casters on one narrow trolley. A full-face diffuser supplies horizontal filtered air, while side handles and a low centre of gravity support controlled movement between workstations. The EC drive can operate from mains power or an optional low-voltage battery pack, allowing short-duration use where a cable would obstruct personnel or material flow. Brakes on two or four casters hold the module steady once the outlet is aligned with the protected operation.
Fitur utama:
A low-mounted battery compartment keeps the centre of gravity below the elevated filter face.
Recessed handles reduce contact with the diffuser and simplify controlled repositioning by one operator.
Variable EC speed permits the horizontal airflow to be reduced for close work or increased for a larger zone.
Kekhawatiran produk pelanggan
Temporary critical work needs a clean-air source that can move safely without sacrificing outlet stability or introducing a trailing-cable hazard.
A fixed FFU cannot follow maintenance work that moves between several tools.The caster-mounted cabinet can be rolled to the active location and locked in position.
A high filter module on a narrow cart can become unstable during turning.The battery and electrical mass sit low in a wide wheelbase to resist tipping.
Trailing mains leads cross operator aisles during short-duration interventions.An optional battery pack supports cordless operation for defined mobile work periods.
Uncontrolled wheels allow the clean-air face to drift away from the target process.Positive caster brakes secure the selected outlet position before work begins.
Aplikasi yang Tipis
Temporary aseptic interventionsEquipment maintenance protectionMobile electronics assemblySampling and inspection pointsEmergency local clean-air support
Parameter teknis
Representative construction ranges for a mobile horizontal-flow FFU are listed below.
| Bahan inti | EC centrifugal fan, micro-glass HEPA or ULPA pack and powder-coated steel mobile chassis |
|---|---|
| Ketebalan Panel (Panel Thickness) | 420-650 mm cabinet depth including wheelbase |
| Efektif lebar | 610-1220 mm active filter-face width |
| Panjang maksimum | Up to 1800 mm overall mobile unit height |
| Baja menghadap ketebalan | 1.0-1.5 mm cabinet sheet with 2.0-3.0 mm structural base plate |
| Kepadatan inti (core density) | Approximately 90-120 kg/m³ compacted density of the final-filter pack |
| Konduktivitas Termal (Thermal Conductivity) | Approximately 0.035-0.043 W/(m·K) for the dry final-filter pack carried by the mobile FFU |
| Permukaan selesai | White low-shedding powder coat with blue handles and grey non-marking caster tyres |
| Jenis Bersama | Gasketed service door and compression-seal filter frame on a welded caster base |
| Customization (Kustomisasi) | Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi. |
Pilihan yang tersedia
Mains-only or rechargeable battery-ready supplyHEPA H14 or ULPA U15 filterTwo-wheel or four-wheel brake setAdjustable-height discharge frame
Planning a Mobile Fan Filter Unit specification?
Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.
