Complete gasketed cleanroom ceiling grid with main runners and cross tees

Стенные и потолочные системы для чистых комнат

Система потолочной решетки в чистых помещениях

A heavy-duty exposed suspension grid with galvanized steel tees, white aluminum caps and factory-applied closed-cell gaskets that seal against lay-in cleanroom ceiling panels.

Factory-Applied Closed-Cell Gasket
24 mm Exposed Tee Face
Heavy-Duty Galvanized Steel Body
Accessible Lay-In Ceiling Modules

Запрос котировки Просмотреть продукты

Введение продукции

Gasketed Cleanroom Ceiling Grid Systems suspend lay-in panels, filters, lights and service modules on a regular network of main runners and cross tees. The double-web galvanized steel body carries ceiling loads, while a factory-coated aluminum cap presents a smooth white room-side surface. A dimensionally stable PVC foam gasket runs along the exposed flange and compresses beneath each ceiling component, closing the contact line against air, moisture and dirt while preserving upward access to the plenum.

Основные характеристики

Continuous closed-cell gasketing seals the bearing edge of every installed ceiling module.

Heavy-duty steel runners support concentrated service layouts more effectively than light decorative grid.

Bayonet-style cross-tee couplings create repeatable square intersections.

Lay-in construction permits filters and ceiling panels to be lifted for above-ceiling maintenance.

Baked white enamel on the exposed cap provides a smooth surface for routine wiping.

Обеспокоенность клиентов продуктами

Ceiling-grid purchasers evaluate air sealing, service-module weight, plenum access and cleanliness at hundreds of panel contact lines.

Small gaps between a lay-in tile and bare T-bar allow bypass air around the module.A compressed closed-cell gasket follows the full bearing perimeter beneath each panel.

Filters and luminaires can overload a light-duty decorative suspension network.Heavy-duty double-web runners and dedicated hangers carry the grid and distribute service loads.

Misaligned cross tees create uneven joints and poorly seated ceiling panels.Factory-punched slots and positive bayonet couplings hold intersections on the selected module.

Permanent sealed ceilings slow maintenance above critical rooms.Gasketed lay-in modules remain individually accessible without cutting the suspension system.

Типичные приложения

Pharmaceutical cleanroom ceilingsSuspended grid ceilings in sterile hospital areasFood and beverage controlled roomsElectronics clean production ceilingsLaboratory ceilings with frequent service access

Технические параметры

Representative component dimensions for a sealed exposed cleanroom ceiling grid are shown below.

Основной материал	N/A — double-web galvanized steel suspension tee with aluminum cap
Толщина панели	N/A — grid supports separate ceiling panels rather than forming a panel
эффективная ширина	24 mm exposed tee face
Максимальная длина	3660 mm main runner
Толщина линий стали	N/A — exposed face is an aluminum cap over a galvanized steel tee
Плотность ядра	N/A — open metal suspension profile has no core
Теплопроводимость	N/A — ceiling grid is not a thermal-insulation layer
Поверхностная отделка	Factory-applied white baked enamel on aluminum cap with closed-cell PVC gasket
Объединенный тип	Bayonet-style cross-tee coupling with gasketed exposed flange
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

600 × 600 mm ceiling module600 × 1200 mm ceiling moduleMatching gasketed perimeter channelAlternative corrosion-resistant metal grade

Planning a Gasketed Cleanroom Ceiling Grid System specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой