Complete gasketed cleanroom ceiling grid with main runners and cross tees

Sistem Dinding dan Langit-langit Cleanroom

Sistem Grid Ceiling Cleanroom Gasketed

A heavy-duty exposed suspension grid with galvanized steel tees, white aluminum caps and factory-applied closed-cell gaskets that seal against lay-in cleanroom ceiling panels.

Factory-Applied Closed-Cell Gasket
24 mm Exposed Tee Face
Heavy-Duty Galvanized Steel Body
Accessible Lay-In Ceiling Modules

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Gasketed Cleanroom Ceiling Grid Systems suspend lay-in panels, filters, lights and service modules on a regular network of main runners and cross tees. The double-web galvanized steel body carries ceiling loads, while a factory-coated aluminum cap presents a smooth white room-side surface. A dimensionally stable PVC foam gasket runs along the exposed flange and compresses beneath each ceiling component, closing the contact line against air, moisture and dirt while preserving upward access to the plenum.

Fitur utama:

Continuous closed-cell gasketing seals the bearing edge of every installed ceiling module.

Heavy-duty steel runners support concentrated service layouts more effectively than light decorative grid.

Bayonet-style cross-tee couplings create repeatable square intersections.

Lay-in construction permits filters and ceiling panels to be lifted for above-ceiling maintenance.

Baked white enamel on the exposed cap provides a smooth surface for routine wiping.

Kekhawatiran produk pelanggan

Ceiling-grid purchasers evaluate air sealing, service-module weight, plenum access and cleanliness at hundreds of panel contact lines.

Small gaps between a lay-in tile and bare T-bar allow bypass air around the module.A compressed closed-cell gasket follows the full bearing perimeter beneath each panel.

Filters and luminaires can overload a light-duty decorative suspension network.Heavy-duty double-web runners and dedicated hangers carry the grid and distribute service loads.

Misaligned cross tees create uneven joints and poorly seated ceiling panels.Factory-punched slots and positive bayonet couplings hold intersections on the selected module.

Permanent sealed ceilings slow maintenance above critical rooms.Gasketed lay-in modules remain individually accessible without cutting the suspension system.

Aplikasi yang Tipis

Langit-langit kamar bersih farmasiSuspended grid ceilings in sterile hospital areasFood and beverage controlled roomsElectronics clean production ceilingsLaboratory ceilings with frequent service access

Parameter teknis

Representative component dimensions for a sealed exposed cleanroom ceiling grid are shown below.

Bahan inti	N/A — double-web galvanized steel suspension tee with aluminum cap
Ketebalan Panel (Panel Thickness)	N/A — grid supports separate ceiling panels rather than forming a panel
Efektif lebar	24 mm exposed tee face
Panjang maksimum	3660 mm main runner
Baja menghadap ketebalan	N/A — exposed face is an aluminum cap over a galvanized steel tee
Kepadatan inti (core density)	N/A — open metal suspension profile has no core
Konduktivitas Termal (Thermal Conductivity)	N/A — ceiling grid is not a thermal-insulation layer
Permukaan selesai	Factory-applied white baked enamel on aluminum cap with closed-cell PVC gasket
Jenis Bersama	Bayonet-style cross-tee coupling with gasketed exposed flange
Customization (Kustomisasi)	A Tersedia berdasarkan aplikasi dan lingkungan operasi yang dimaksudkan

Pilihan yang tersedia

600 × 600 mm ceiling module600 × 1200 mm ceiling moduleMatching gasketed perimeter channelAlternative corrosion-resistant metal grade

Planning a Gasketed Cleanroom Ceiling Grid System specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami