Complete gasketed cleanroom ceiling grid with main runners and cross tees

Dinding bilik bersih dan sistem siling

Sistem Grid Siling Cleanroom Gasketed

A heavy-duty exposed suspension grid with galvanized steel tees, white aluminum caps and factory-applied closed-cell gaskets that seal against lay-in cleanroom ceiling panels.

Factory-Applied Closed-Cell Gasket
24 mm Exposed Tee Face
Heavy-Duty Galvanized Steel Body
Accessible Lay-In Ceiling Modules

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

Gasketed Cleanroom Ceiling Grid Systems suspend lay-in panels, filters, lights and service modules on a regular network of main runners and cross tees. The double-web galvanized steel body carries ceiling loads, while a factory-coated aluminum cap presents a smooth white room-side surface. A dimensionally stable PVC foam gasket runs along the exposed flange and compresses beneath each ceiling component, closing the contact line against air, moisture and dirt while preserving upward access to the plenum.

Ciri-ciri Utama

Continuous closed-cell gasketing seals the bearing edge of every installed ceiling module.

Heavy-duty steel runners support concentrated service layouts more effectively than light decorative grid.

Bayonet-style cross-tee couplings create repeatable square intersections.

Lay-in construction permits filters and ceiling panels to be lifted for above-ceiling maintenance.

Baked white enamel on the exposed cap provides a smooth surface for routine wiping.

Kebimbangan Produk Pelanggan

Ceiling-grid purchasers evaluate air sealing, service-module weight, plenum access and cleanliness at hundreds of panel contact lines.

Small gaps between a lay-in tile and bare T-bar allow bypass air around the module.A compressed closed-cell gasket follows the full bearing perimeter beneath each panel.

Filters and luminaires can overload a light-duty decorative suspension network.Heavy-duty double-web runners and dedicated hangers carry the grid and distribute service loads.

Misaligned cross tees create uneven joints and poorly seated ceiling panels.Factory-punched slots and positive bayonet couplings hold intersections on the selected module.

Permanent sealed ceilings slow maintenance above critical rooms.Gasketed lay-in modules remain individually accessible without cutting the suspension system.

Permohonan yang biasa

Pharmaceutical cleanroom ceilingsSuspended grid ceilings in sterile hospital areasFood and beverage controlled roomsElectronics clean production ceilingsLaboratory ceilings with frequent service access

Parameter teknikal

Representative component dimensions for a sealed exposed cleanroom ceiling grid are shown below.

Bahan Teras	N/A — double-web galvanized steel suspension tee with aluminum cap
Ketebalan Panel	N/A — grid supports separate ceiling panels rather than forming a panel
Lebar berkesan	24 mm exposed tee face
Panjang maksimum	3660 mm main runner
Keluli Menghadapi Ketebalan	N/A — exposed face is an aluminum cap over a galvanized steel tee
Ketumpatan teras	N/A — open metal suspension profile has no core
Kekonduksian Terma	N/A — ceiling grid is not a thermal-insulation layer
Kemasan permukaan	Factory-applied white baked enamel on aluminum cap with closed-cell PVC gasket
Jenis Bersatu	Bayonet-style cross-tee coupling with gasketed exposed flange
Penyesuaian	Terdapat berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi

Pilihan yang boleh didapati

600 × 600 mm ceiling module600 × 1200 mm ceiling moduleMatching gasketed perimeter channelAlternative corrosion-resistant metal grade

Planning a Gasketed Cleanroom Ceiling Grid System specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami