Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Sistema de cuadrícula de techo de sala limpia
A heavy-duty exposed suspension grid with galvanized steel tees, white aluminum caps and factory-applied closed-cell gaskets that seal against lay-in cleanroom ceiling panels.
- Factory-Applied Closed-Cell Gasket
- 24 mm Exposed Tee Face
- Heavy-Duty Galvanized Steel Body
- Accessible Lay-In Ceiling Modules
Introducción del producto
Gasketed Cleanroom Ceiling Grid Systems suspend lay-in panels, filters, lights and service modules on a regular network of main runners and cross tees. The double-web galvanized steel body carries ceiling loads, while a factory-coated aluminum cap presents a smooth white room-side surface. A dimensionally stable PVC foam gasket runs along the exposed flange and compresses beneath each ceiling component, closing the contact line against air, moisture and dirt while preserving upward access to the plenum.
Características clave
Heavy-duty steel runners support concentrated service layouts more effectively than light decorative grid.
Bayonet-style cross-tee couplings create repeatable square intersections.
Lay-in construction permits filters and ceiling panels to be lifted for above-ceiling maintenance.
Baked white enamel on the exposed cap provides a smooth surface for routine wiping.
Preocupaciones del producto del cliente
Ceiling-grid purchasers evaluate air sealing, service-module weight, plenum access and cleanliness at hundreds of panel contact lines.
Small gaps between a lay-in tile and bare T-bar allow bypass air around the module.A compressed closed-cell gasket follows the full bearing perimeter beneath each panel.
Filters and luminaires can overload a light-duty decorative suspension network.Heavy-duty double-web runners and dedicated hangers carry the grid and distribute service loads.
Misaligned cross tees create uneven joints and poorly seated ceiling panels.Factory-punched slots and positive bayonet couplings hold intersections on the selected module.
Permanent sealed ceilings slow maintenance above critical rooms.Gasketed lay-in modules remain individually accessible without cutting the suspension system.
Aplicaciones típicas
Pharmaceutical cleanroom ceilingsSuspended grid ceilings in sterile hospital areasFood and beverage controlled roomsElectronics clean production ceilingsLaboratory ceilings with frequent service access
Parámetros técnicos
Representative component dimensions for a sealed exposed cleanroom ceiling grid are shown below.
| Materiales Core | N/A — double-web galvanized steel suspension tee with aluminum cap |
|---|---|
| Panel de espesor | N/A — grid supports separate ceiling panels rather than forming a panel |
| Ancho efectivo | 24 mm exposed tee face |
| Longitud máxima | 3660 mm main runner |
| Acero frente a espesor | N/A — exposed face is an aluminum cap over a galvanized steel tee |
| Densidad Core | N/A — open metal suspension profile has no core |
| Conductividad térmica | N/A — ceiling grid is not a thermal-insulation layer |
| Superficie acabada | Factory-applied white baked enamel on aluminum cap with closed-cell PVC gasket |
| Tipo conjunto | Bayonet-style cross-tee coupling with gasketed exposed flange |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
600 × 600 mm ceiling module600 × 1200 mm ceiling moduleMatching gasketed perimeter channelAlternative corrosion-resistant metal grade
Planning a Gasketed Cleanroom Ceiling Grid System specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
