Complete white cleanroom cable tray with smooth cover and rounded edges

Освещение и электрическое оборудование в чистых помещениях

Кабельная подкладка для чистых помещений

A smooth cable-support system with rounded edges and cleanable covers for segregated routing above or within controlled spaces.

Smooth Rounded Tray Profile
Removable Cleanable Covers
Power and Signal Segregation
Matched Bends and Tees

Запрос котировки Просмотреть продукты

Введение продукции

Cleanroom cable tray uses a solid-bottom or limited-slot metal channel rather than an open industrial ladder inside exposed controlled areas. Snap-on or tool-retained covers shield cables from fallout and present a smooth upper face. Factory bends, tees, reducers and dividers maintain consistent edge radii and route segregation across changes in direction.

Основные характеристики

Rolled edges remove sharp lips that damage cables or cleaning wipes.

Continuous covers prevent loose cables from becoming a horizontal dust shelf.

Internal dividers separate power, data and instrumentation routes.

Matched fittings preserve cable bend radius at corners and branches.

Suspension brackets position the tray with access for cleaning around it.

Обеспокоенность клиентов продуктами

Exposed cables and conventional perforated trays create irregular surfaces that are difficult to wipe and easy to overfill.

Loose cable bundles collect dust and obstruct ceiling cleaning.A covered tray contains the route behind a continuous smooth surface.

Sharp cut edges abrade insulation during cable pulling.Rolled rims and factory fittings maintain smooth contact surfaces.

Power and sensor cables share one congested channel.Removable metal dividers preserve planned segregation.

Site-made corner cuts leave gaps and exposed fasteners.Matched bends, tees and reducers complete each directional change.

Типичные приложения

Cleanroom ceiling servicesEquipment power distributionControl and instrumentation routingLaboratory utility corridors

Технические параметры

Typical configurable construction ranges for a cleanroom cable tray are listed below.

Основной материал	Powder-coated galvanized steel or aluminum solid-bottom tray with matching covers, dividers and fittings
Толщина панели	50-150 mm tray side-wall height
эффективная ширина	100-600 mm internal cable width
Максимальная длина	Up to 3000 mm per straight tray section
Толщина линий стали	1.0-2.0 mm tray and cover sheet thickness
Плотность ядра	Approximately 7850 kg/m³ for galvanized steel tray material
Теплопроводимость	45-60 W/(m·K) for the steel tray body
Поверхностная отделка	Smooth white powder coat or zinc-coated finish with deburred rolled edges
Объединенный тип	Bolted splice plates with snap-on or retained cover, formed bends and removable internal divider
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Solid or limited-perforation bottomWhite coated steel or aluminumInternal segregation dividersStraight, bend, tee and reducer fittings

Planning a Cleanroom Cable Tray specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой