Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Iluminación de sala limpia y equipos eléctricos
Sala limpia Cable Tray
A smooth cable-support system with rounded edges and cleanable covers for segregated routing above or within controlled spaces.
- Smooth Rounded Tray Profile
- Removable Cleanable Covers
- Power and Signal Segregation
- Matched Bends and Tees
Introducción del producto
Cleanroom cable tray uses a solid-bottom or limited-slot metal channel rather than an open industrial ladder inside exposed controlled areas. Snap-on or tool-retained covers shield cables from fallout and present a smooth upper face. Factory bends, tees, reducers and dividers maintain consistent edge radii and route segregation across changes in direction.
Características clave
Continuous covers prevent loose cables from becoming a horizontal dust shelf.
Internal dividers separate power, data and instrumentation routes.
Matched fittings preserve cable bend radius at corners and branches.
Suspension brackets position the tray with access for cleaning around it.
Preocupaciones del producto del cliente
Exposed cables and conventional perforated trays create irregular surfaces that are difficult to wipe and easy to overfill.
Loose cable bundles collect dust and obstruct ceiling cleaning.A covered tray contains the route behind a continuous smooth surface.
Sharp cut edges abrade insulation during cable pulling.Rolled rims and factory fittings maintain smooth contact surfaces.
Power and sensor cables share one congested channel.Removable metal dividers preserve planned segregation.
Site-made corner cuts leave gaps and exposed fasteners.Matched bends, tees and reducers complete each directional change.
Aplicaciones típicas
Cleanroom ceiling servicesEquipment power distributionControl and instrumentation routingLaboratory utility corridors
Parámetros técnicos
Typical configurable construction ranges for a cleanroom cable tray are listed below.
| Materiales Core | Powder-coated galvanized steel or aluminum solid-bottom tray with matching covers, dividers and fittings |
|---|---|
| Panel de espesor | 50-150 mm tray side-wall height |
| Ancho efectivo | 100-600 mm internal cable width |
| Longitud máxima | Up to 3000 mm per straight tray section |
| Acero frente a espesor | 1.0-2.0 mm tray and cover sheet thickness |
| Densidad Core | Approximately 7850 kg/m³ for galvanized steel tray material |
| Conductividad térmica | 45-60 W/(m·K) for the steel tray body |
| Superficie acabada | Smooth white powder coat or zinc-coated finish with deburred rolled edges |
| Tipo conjunto | Bolted splice plates with snap-on or retained cover, formed bends and removable internal divider |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Solid or limited-perforation bottomWhite coated steel or aluminumInternal segregation dividersStraight, bend, tee and reducer fittings
Planning a Cleanroom Cable Tray specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
