Complete white cleanroom cable tray with smooth cover and rounded edges

クリーンルーム照明 · 電気機器

クリーンルームケーブルトレイ

A smooth cable-support system with rounded edges and cleanable covers for segregated routing above or within controlled spaces.

Smooth Rounded Tray Profile
Removable Cleanable Covers
Power and Signal Segregation
Matched Bends and Tees

見積もりリクエスト製品案内

商品紹介

Cleanroom cable tray uses a solid-bottom or limited-slot metal channel rather than an open industrial ladder inside exposed controlled areas. Snap-on or tool-retained covers shield cables from fallout and present a smooth upper face. Factory bends, tees, reducers and dividers maintain consistent edge radii and route segregation across changes in direction.

主要な特徴

Rolled edges remove sharp lips that damage cables or cleaning wipes.

Continuous covers prevent loose cables from becoming a horizontal dust shelf.

Internal dividers separate power, data and instrumentation routes.

Matched fittings preserve cable bend radius at corners and branches.

Suspension brackets position the tray with access for cleaning around it.

お客様の製品に関する懸念事項

Exposed cables and conventional perforated trays create irregular surfaces that are difficult to wipe and easy to overfill.

Loose cable bundles collect dust and obstruct ceiling cleaning.A covered tray contains the route behind a continuous smooth surface.

Sharp cut edges abrade insulation during cable pulling.Rolled rims and factory fittings maintain smooth contact surfaces.

Power and sensor cables share one congested channel.Removable metal dividers preserve planned segregation.

Site-made corner cuts leave gaps and exposed fasteners.Matched bends, tees and reducers complete each directional change.

典型的な用途

Cleanroom ceiling servicesEquipment power distributionControl and instrumentation routingLaboratory utility corridors

技術的なパラメータ

Typical configurable construction ranges for a cleanroom cable tray are listed below.

コア材料	Powder-coated galvanized steel or aluminum solid-bottom tray with matching covers, dividers and fittings
パネルの厚さ	50-150 mm tray side-wall height
有効幅	100-600 mm internal cable width
最大長さ	Up to 3000 mm per straight tray section
鋼鉄の厚さを直面する	1.0-2.0 mm tray and cover sheet thickness
コア密度	Approximately 7850 kg/m³ for galvanized steel tray material
熱伝導率	45-60 W/(m·K) for the steel tray body
表面仕上げ	Smooth white powder coat or zinc-coated finish with deburred rolled edges
ジョイントタイプ	Bolted splice plates with snap-on or retained cover, formed bends and removable internal divider
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Solid or limited-perforation bottomWhite coated steel or aluminumInternal segregation dividersStraight, bend, tee and reducer fittings

Planning a Cleanroom Cable Tray specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する