Complete white cleanroom cable tray with smooth cover and rounded edges

클린룸 조명 및 전기 장비

클린룸 케이블 트레이

A smooth cable-support system with rounded edges and cleanable covers for segregated routing above or within controlled spaces.

Smooth Rounded Tray Profile
Removable Cleanable Covers
Power and Signal Segregation
Matched Bends and Tees

견적 요청 제품 찾아보기

상품 소개

Cleanroom cable tray uses a solid-bottom or limited-slot metal channel rather than an open industrial ladder inside exposed controlled areas. Snap-on or tool-retained covers shield cables from fallout and present a smooth upper face. Factory bends, tees, reducers and dividers maintain consistent edge radii and route segregation across changes in direction.

주요 기능

Rolled edges remove sharp lips that damage cables or cleaning wipes.

Continuous covers prevent loose cables from becoming a horizontal dust shelf.

Internal dividers separate power, data and instrumentation routes.

Matched fittings preserve cable bend radius at corners and branches.

Suspension brackets position the tray with access for cleaning around it.

고객 제품 관심사

Exposed cables and conventional perforated trays create irregular surfaces that are difficult to wipe and easy to overfill.

Loose cable bundles collect dust and obstruct ceiling cleaning.A covered tray contains the route behind a continuous smooth surface.

Sharp cut edges abrade insulation during cable pulling.Rolled rims and factory fittings maintain smooth contact surfaces.

Power and sensor cables share one congested channel.Removable metal dividers preserve planned segregation.

Site-made corner cuts leave gaps and exposed fasteners.Matched bends, tees and reducers complete each directional change.

일반적인 응용 프로그램

Cleanroom ceiling servicesEquipment power distributionControl and instrumentation routingLaboratory utility corridors

기술 매개변수

Typical configurable construction ranges for a cleanroom cable tray are listed below.

핵심 재료	Powder-coated galvanized steel or aluminum solid-bottom tray with matching covers, dividers and fittings
패널 두께	50-150 mm tray side-wall height
유효 폭	100-600 mm internal cable width
최대 길이	Up to 3000 mm per straight tray section
강철 면면 두께	1.0-2.0 mm tray and cover sheet thickness
코어 밀도	Approximately 7850 kg/m³ for galvanized steel tray material
열전도도 (Thermal Conductivity)	45-60 W/(m·K) for the steel tray body
표면 마무리	Smooth white powder coat or zinc-coated finish with deburred rolled edges
접합 유형	Bolted splice plates with snap-on or retained cover, formed bends and removable internal divider
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Solid or limited-perforation bottomWhite coated steel or aluminumInternal segregation dividersStraight, bend, tee and reducer fittings

Planning a Cleanroom Cable Tray specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.