Complete surface hygiene monitoring kit in open blue fitted case

Produtos de Monitoramento Ambiental Microbiológico

Kit de monitoramento de higiene de superfície

A portable organized kit combining an ATP meter, surface test swabs, controls and sampling accessories for rapid cleaning verification.

Complete Portable Test Set
Meter and Surface Swabs
Positive Control Support
Fitted Protective Case

Solicite um orçamento. Browse produtos

Introdução do produto

The Surface Hygiene Monitoring Kit packages the essential tools for a consistent ATP cleaning-verification program. A handheld luminometer, compatible surface test devices, a sampling-area guide and control material are stored in a fitted case with charging accessories. The coordinated set supports standardized sampling, immediate readings and controlled transport between monitored locations.

Características-chave

A fitted case keeps the meter, test devices and accessories protected and organized.

Single-use surface swabs combine sample collection and reagent activation in one tube.

A reusable area template improves consistency when swabbing defined surface sizes.

Positive-control material provides a routine check of test-device response.

Preocupações do produto do cliente

A field hygiene program needs repeatable sampling tools, protected transport and simple readiness checks at every location.

Operators use inconsistent swabbed areas and techniques.A defined sampling template and organized procedure accessories standardize collection.

Missing components delay tests during a facility round.The fitted case provides dedicated positions for meter, swabs, control and charger.

Test-device deterioration is not obvious before use.Positive-control material verifies expected reagent and meter response.

Loose instruments and consumables are damaged in transport.A rigid protective case and fitted insert secure the complete monitoring set.

Aplicações típicas

Cleanroom cleaning verificationProduction-equipment hygiene checksSanitation audit spot testingMulti-location ATP monitoring programs

Parâmetros técnicos

Typical construction values for a portable surface hygiene monitoring kit are listed below.

Material principal	Polymer ATP meter, polypropylene test tubes and impact-resistant carry case
Painel de espessura	2-5 mm nominal case and instrument housing wall
Largura efetiva	100 mm nominal reusable sampling-template width
Comprimento máximo	Up to 450 mm closed carry-case length
Aço enfrentando espessura	0.8-1.2 mm equivalent internal optical shield thickness
Densidade Core	30-45 kg/m³ for protective case foam insert
Condutividade térmica	0.033-0.045 W/(m·K) for case foam
Superfície acabado	Textured blue case with fitted black foam and cleanable instrument surfaces
Tipo conjunto	Latched hinged case with fitted component recesses and capped test devices
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Surface or water ATP swabsPositive-control kitSampling templatesCharging dock and data cable

Planning a Surface Hygiene Monitoring Kit specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe