English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
منتجات المراقبة البيئية الميكروبيولوجية
Surface النظافة كيت مراقبة
A portable organized kit combining an ATP meter, surface test swabs, controls and sampling accessories for rapid cleaning verification.
- Complete Portable Test Set
- Meter and Surface Swabs
- Positive Control Support
- Fitted Protective Case
مقدمة المنتج
The Surface Hygiene Monitoring Kit packages the essential tools for a consistent ATP cleaning-verification program. A handheld luminometer, compatible surface test devices, a sampling-area guide and control material are stored in a fitted case with charging accessories. The coordinated set supports standardized sampling, immediate readings and controlled transport between monitored locations.
الخصائص الرئيسية
Single-use surface swabs combine sample collection and reagent activation in one tube.
A reusable area template improves consistency when swabbing defined surface sizes.
Positive-control material provides a routine check of test-device response.
مخاوف المنتج للعملاء
A field hygiene program needs repeatable sampling tools, protected transport and simple readiness checks at every location.
Operators use inconsistent swabbed areas and techniques.A defined sampling template and organized procedure accessories standardize collection.
Missing components delay tests during a facility round.The fitted case provides dedicated positions for meter, swabs, control and charger.
Test-device deterioration is not obvious before use.Positive-control material verifies expected reagent and meter response.
Loose instruments and consumables are damaged in transport.A rigid protective case and fitted insert secure the complete monitoring set.
تطبيقات نموذجية
Cleanroom cleaning verificationProduction-equipment hygiene checksSanitation audit spot testingMulti-location ATP monitoring programs
المعلمات الفنية
Typical construction values for a portable surface hygiene monitoring kit are listed below.
| المواد الأساسية | Polymer ATP meter, polypropylene test tubes and impact-resistant carry case |
|---|---|
| سمك اللوحة | 2-5 mm nominal case and instrument housing wall |
| العرض الفعال | 100 mm nominal reusable sampling-template width |
| الحد الأقصى الطول | Up to 450 mm closed carry-case length |
| الصلب يواجه سمك | 0.8-1.2 mm equivalent internal optical shield thickness |
| الكثافة الأساسية | 30-45 kg/m³ for protective case foam insert |
| الموصلية الحرارية | 0.033-0.045 W/(m·K) for case foam |
| إنهاء السطح | Textured blue case with fitted black foam and cleanable instrument surfaces |
| نوع المشترك | Latched hinged case with fitted component recesses and capped test devices |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Surface or water ATP swabsPositive-control kitSampling templatesCharging dock and data cable
Planning a Surface Hygiene Monitoring Kit specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
