Complete surface hygiene monitoring kit in open blue fitted case

Produits de surveillance environnementale microbiologique

Kit de surveillance de l'hygiène de surface

A portable organized kit combining an ATP meter, surface test swabs, controls and sampling accessories for rapid cleaning verification.

Complete Portable Test Set
Meter and Surface Swabs
Positive Control Support
Fitted Protective Case

Demander un devis. Browse les produits

Introduction de produit

The Surface Hygiene Monitoring Kit packages the essential tools for a consistent ATP cleaning-verification program. A handheld luminometer, compatible surface test devices, a sampling-area guide and control material are stored in a fitted case with charging accessories. The coordinated set supports standardized sampling, immediate readings and controlled transport between monitored locations.

Key Features

A fitted case keeps the meter, test devices and accessories protected and organized.

Single-use surface swabs combine sample collection and reagent activation in one tube.

A reusable area template improves consistency when swabbing defined surface sizes.

Positive-control material provides a routine check of test-device response.

Préoccupations du client produit

A field hygiene program needs repeatable sampling tools, protected transport and simple readiness checks at every location.

Operators use inconsistent swabbed areas and techniques.A defined sampling template and organized procedure accessories standardize collection.

Missing components delay tests during a facility round.The fitted case provides dedicated positions for meter, swabs, control and charger.

Test-device deterioration is not obvious before use.Positive-control material verifies expected reagent and meter response.

Loose instruments and consumables are damaged in transport.A rigid protective case and fitted insert secure the complete monitoring set.

Les applications typiques

Cleanroom cleaning verificationProduction-equipment hygiene checksSanitation audit spot testingMulti-location ATP monitoring programs

Paramètres techniques

Typical construction values for a portable surface hygiene monitoring kit are listed below.

Matériaux de base	Polymer ATP meter, polypropylene test tubes and impact-resistant carry case
Panneau épaisseur	2-5 mm nominal case and instrument housing wall
Largeur effective	100 mm nominal reusable sampling-template width
Longueur maximale	Up to 450 mm closed carry-case length
Acier face épaisseur	0.8-1.2 mm equivalent internal optical shield thickness
Densité Core	30-45 kg/m³ for protective case foam insert
Conductivité thermique	0.033-0.045 W/(m·K) for case foam
surface finie	Textured blue case with fitted black foam and cleanable instrument surfaces
Type joint	Latched hinged case with fitted component recesses and capped test devices
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

Surface or water ATP swabsPositive-control kitSampling templatesCharging dock and data cable

Planning a Surface Hygiene Monitoring Kit specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe