Complete surface hygiene monitoring kit in open blue fitted case

Produk Pemantauan Lingkungan Mikrobiologi

Kit Pemantauan Kebersihan Permukaan

A portable organized kit combining an ATP meter, surface test swabs, controls and sampling accessories for rapid cleaning verification.

Complete Portable Test Set
Meter and Surface Swabs
Positive Control Support
Fitted Protective Case

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The Surface Hygiene Monitoring Kit packages the essential tools for a consistent ATP cleaning-verification program. A handheld luminometer, compatible surface test devices, a sampling-area guide and control material are stored in a fitted case with charging accessories. The coordinated set supports standardized sampling, immediate readings and controlled transport between monitored locations.

Fitur utama:

A fitted case keeps the meter, test devices and accessories protected and organized.

Single-use surface swabs combine sample collection and reagent activation in one tube.

A reusable area template improves consistency when swabbing defined surface sizes.

Positive-control material provides a routine check of test-device response.

Kekhawatiran produk pelanggan

A field hygiene program needs repeatable sampling tools, protected transport and simple readiness checks at every location.

Operators use inconsistent swabbed areas and techniques.A defined sampling template and organized procedure accessories standardize collection.

Missing components delay tests during a facility round.The fitted case provides dedicated positions for meter, swabs, control and charger.

Test-device deterioration is not obvious before use.Positive-control material verifies expected reagent and meter response.

Loose instruments and consumables are damaged in transport.A rigid protective case and fitted insert secure the complete monitoring set.

Aplikasi yang Tipis

Cleanroom cleaning verificationProduction-equipment hygiene checksSanitation audit spot testingMulti-location ATP monitoring programs

Parameter teknis

Typical construction values for a portable surface hygiene monitoring kit are listed below.

Bahan inti	Polymer ATP meter, polypropylene test tubes and impact-resistant carry case
Ketebalan Panel (Panel Thickness)	2-5 mm nominal case and instrument housing wall
Efektif lebar	100 mm nominal reusable sampling-template width
Panjang maksimum	Up to 450 mm closed carry-case length
Baja menghadap ketebalan	0.8-1.2 mm equivalent internal optical shield thickness
Kepadatan inti (core density)	30-45 kg/m³ for protective case foam insert
Konduktivitas Termal (Thermal Conductivity)	0.033-0.045 W/(m·K) for case foam
Permukaan selesai	Textured blue case with fitted black foam and cleanable instrument surfaces
Jenis Bersama	Latched hinged case with fitted component recesses and capped test devices
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Surface or water ATP swabsPositive-control kitSampling templatesCharging dock and data cable

Planning a Surface Hygiene Monitoring Kit specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami