Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Filtros de ar e filtragem química
Z Filtro Molecular Composto de Enxofre
A hybrid adsorbent filter formulated for hydrogen sulfide, sulfur dioxide and odorous mercaptans in demanding industrial air streams.
- H2S and SO2 Control
- Hybrid Reactive Media
- Corrosion Protection
- High-Capacity Deep Bed
Introdução do produto
This molecular filter contains chemically treated alumina, activated carbon or co-formed hybrid pellets with high reactivity toward reduced and oxidized sulfur compounds. The adsorbent bed is held in a robust perforated cassette that controls residence time and prevents channeling. It is used where sulfur gases create corrosion, odour or process-yield problems, including wastewater, pulp processing and industrial control environments. Media grades can be arranged in stages when VOCs are also present.
Características-chave
Spherical pellets maintain open airflow passages through a deep media bed.
Corrosion-resistant retainers confine media in aggressive industrial environments.
Separate media stages prevent VOC loading from consuming sulfur-specific capacity.
Preocupações do produto do cliente
Sulfur gases can cause rapid electronic corrosion and severe odour at concentrations too low for particle filters to affect.
Hydrogen sulfide corrodes copper traces inside control cabinets.Reactive sulfur media removes H2S before make-up air reaches sensitive electronics.
High humidity shortens the apparent capacity of conventional carbon.Hybrid or impregnated pellets are selected for the expected sulfur species and moisture level.
Mercaptan odour persists after particulate treatment.A chemically active deep bed captures reduced-sulfur molecules that pass through dust filters.
A mixed contaminant stream exhausts one adsorbent prematurely.Dedicated sulfur and VOC stages divide the load according to each media's adsorption chemistry.
Aplicações típicas
Wastewater treatment plantsPulp and paper control roomsOil and gas facilitiesBiogas conditioning roomsIndustrial electronics protection
Parâmetros técnicos
Typical construction values for a sulfur-compound molecular filter are listed below.
| Material principal | Impregnated activated alumina, treated carbon or hybrid pellets for H2S, SO2 and mercaptans |
|---|---|
| Painel de espessura | 150–300 mm overall filter depth |
| Largura efetiva | 305 - 610 mm Largura nominal da célula |
| Comprimento máximo | Up to 762 mm nominal cell height |
| Aço enfrentando espessura | 0.8–1.5 mm coated or 304 stainless-steel casing |
| Densidade Core | 600–850 kg/m³ packed hybrid-media bulk density |
| Condutividade térmica | 0.12–0.28 W/(m·K) for the pellet bed |
| Superfície acabado | Brushed 304 stainless steel or corrosion-resistant powder coating |
| Tipo conjunto | Deep-bed cassette with perforated retainers, sealed corners and EPDM perimeter gasket |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
H2S-selective hybrid pelletsSO2 and acid-gas media blendStainless-steel refillable cellSeries arrangement with VOC carbon
Planning a Sulfur Compound Molecular Filter specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
