Three-quarter view of sulfur compound molecular filter with purple hybrid pellets

Воздушные фильтры и химическая фильтрация

Молекулярный фильтр соединения серы

A hybrid adsorbent filter formulated for hydrogen sulfide, sulfur dioxide and odorous mercaptans in demanding industrial air streams.

H2S and SO2 Control
Hybrid Reactive Media
Corrosion Protection
High-Capacity Deep Bed

Запрос котировки Просмотреть продукты

Введение продукции

This molecular filter contains chemically treated alumina, activated carbon or co-formed hybrid pellets with high reactivity toward reduced and oxidized sulfur compounds. The adsorbent bed is held in a robust perforated cassette that controls residence time and prevents channeling. It is used where sulfur gases create corrosion, odour or process-yield problems, including wastewater, pulp processing and industrial control environments. Media grades can be arranged in stages when VOCs are also present.

Основные характеристики

Hybrid chemistry targets both hydrogen sulfide and broader acidic sulfur species.

Spherical pellets maintain open airflow passages through a deep media bed.

Corrosion-resistant retainers confine media in aggressive industrial environments.

Separate media stages prevent VOC loading from consuming sulfur-specific capacity.

Обеспокоенность клиентов продуктами

Sulfur gases can cause rapid electronic corrosion and severe odour at concentrations too low for particle filters to affect.

Hydrogen sulfide corrodes copper traces inside control cabinets.Reactive sulfur media removes H2S before make-up air reaches sensitive electronics.

High humidity shortens the apparent capacity of conventional carbon.Hybrid or impregnated pellets are selected for the expected sulfur species and moisture level.

Mercaptan odour persists after particulate treatment.A chemically active deep bed captures reduced-sulfur molecules that pass through dust filters.

A mixed contaminant stream exhausts one adsorbent prematurely.Dedicated sulfur and VOC stages divide the load according to each media's adsorption chemistry.

Типичные приложения

Wastewater treatment plantsPulp and paper control roomsOil and gas facilitiesBiogas conditioning roomsIndustrial electronics protection

Технические параметры

Typical construction values for a sulfur-compound molecular filter are listed below.

Основной материал	Impregnated activated alumina, treated carbon or hybrid pellets for H2S, SO2 and mercaptans
Толщина панели	150–300 mm overall filter depth
эффективная ширина	305–610 mm nominal cell width
Максимальная длина	Up to 762 mm nominal cell height
Толщина линий стали	0.8–1.5 mm coated or 304 stainless-steel casing
Плотность ядра	600–850 kg/m³ packed hybrid-media bulk density
Теплопроводимость	0.12–0.28 W/(m·K) for the pellet bed
Поверхностная отделка	Brushed 304 stainless steel or corrosion-resistant powder coating
Объединенный тип	Deep-bed cassette with perforated retainers, sealed corners and EPDM perimeter gasket
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

H2S-selective hybrid pelletsSO2 and acid-gas media blendStainless-steel refillable cellSeries arrangement with VOC carbon

Planning a Sulfur Compound Molecular Filter specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой