English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
مركب الكبريت مرشح جزيئي
A hybrid adsorbent filter formulated for hydrogen sulfide, sulfur dioxide and odorous mercaptans in demanding industrial air streams.
- H2S and SO2 Control
- Hybrid Reactive Media
- Corrosion Protection
- High-Capacity Deep Bed
مقدمة المنتج
This molecular filter contains chemically treated alumina, activated carbon or co-formed hybrid pellets with high reactivity toward reduced and oxidized sulfur compounds. The adsorbent bed is held in a robust perforated cassette that controls residence time and prevents channeling. It is used where sulfur gases create corrosion, odour or process-yield problems, including wastewater, pulp processing and industrial control environments. Media grades can be arranged in stages when VOCs are also present.
الخصائص الرئيسية
Spherical pellets maintain open airflow passages through a deep media bed.
Corrosion-resistant retainers confine media in aggressive industrial environments.
Separate media stages prevent VOC loading from consuming sulfur-specific capacity.
مخاوف المنتج للعملاء
Sulfur gases can cause rapid electronic corrosion and severe odour at concentrations too low for particle filters to affect.
Hydrogen sulfide corrodes copper traces inside control cabinets.Reactive sulfur media removes H2S before make-up air reaches sensitive electronics.
High humidity shortens the apparent capacity of conventional carbon.Hybrid or impregnated pellets are selected for the expected sulfur species and moisture level.
Mercaptan odour persists after particulate treatment.A chemically active deep bed captures reduced-sulfur molecules that pass through dust filters.
A mixed contaminant stream exhausts one adsorbent prematurely.Dedicated sulfur and VOC stages divide the load according to each media's adsorption chemistry.
تطبيقات نموذجية
Wastewater treatment plantsPulp and paper control roomsOil and gas facilitiesBiogas conditioning roomsIndustrial electronics protection
المعلمات الفنية
Typical construction values for a sulfur-compound molecular filter are listed below.
| المواد الأساسية | Impregnated activated alumina, treated carbon or hybrid pellets for H2S, SO2 and mercaptans |
|---|---|
| سمك اللوحة | 150–300 mm overall filter depth |
| العرض الفعال | 305–610 mm nominal cell width |
| الحد الأقصى الطول | Up to 762 mm nominal cell height |
| الصلب يواجه سمك | 0.8–1.5 mm coated or 304 stainless-steel casing |
| الكثافة الأساسية | 600–850 kg/m³ packed hybrid-media bulk density |
| الموصلية الحرارية | 0.12–0.28 W/(m·K) for the pellet bed |
| إنهاء السطح | Brushed 304 stainless steel or corrosion-resistant powder coating |
| نوع المشترك | Deep-bed cassette with perforated retainers, sealed corners and EPDM perimeter gasket |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
H2S-selective hybrid pelletsSO2 and acid-gas media blendStainless-steel refillable cellSeries arrangement with VOC carbon
Planning a Sulfur Compound Molecular Filter specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
