Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
ESD e produtos antiestáticos
Piso estático-dissipativo
Static-Dissipative Flooring provides a durable homogeneous vinyl surface engineered to release accumulated charge at a controlled rate through a properly grounded installation.
- Permanently dissipative homogeneous vinyl construction.
- Tile or sheet formats for controlled-area layouts.
- Grounded installation through conductive adhesive and copper strips.
Introdução do produto
The flooring contains static-control material throughout its compact vinyl thickness rather than relying on a temporary surface treatment. Tiles or sheets are bonded to a prepared substrate, with conductive adhesive and copper strips used where required by the electrical design. The matte, non-directional surface supports frequent cleaning, rolling traffic and coordinated color schemes in controlled technical interiors.
Características-chave
Controlled charge decay is suited to general ESD-sensitive processing environments.
Low-glare surface is easy to inspect and maintain.
Tile format supports localized replacement; sheet format reduces joint count.
Compact construction accommodates rolling chairs and light mobile equipment.
Copper-strip and conductive-adhesive installation integrates with the designated grounding system.
Preocupações do produto do cliente
A reliable dissipative floor depends on the covering, adhesive, grounding layout, substrate preparation and maintenance working as one installed system.
A topical antistatic finish wears away.Homogeneous construction distributes dissipative material through the full floor thickness.
Electrical readings differ between floor areas.Conductive adhesive and a planned copper-strip network create defined ground paths across the installation.
Seams trap residue in controlled rooms.Heat-welded sheet seams or accurately fitted tile joints form a smooth cleanable surface.
Rolling chairs leave visible indentation.Compact resilient vinyl is selected for low residual indentation under normal technical-area traffic.
Damaged areas are expensive to repair.Tile format enables localized replacement where maintenance flexibility is a priority.
Aplicações típicas
Electronics assembly and inspection rooms.Cleanrooms and technical laboratories.Healthcare diagnostic and equipment areas.Precision manufacturing and test facilities.Controlled corridors connecting ESD protected zones.
Parâmetros técnicos
The values below represent common homogeneous static-dissipative vinyl formats and may be adjusted to match the room layout and installed grounding design.
| Material principal | Permanently static-dissipative homogeneous polyvinyl chloride |
|---|---|
| Painel de espessura | 2.0 mm |
| Largura efetiva | 610 mm tile width or 2000 mm sheet width |
| Comprimento máximo | Up to 23000 mm sheet roll length |
| Aço enfrentando espessura | 0.1 mm nominal copper grounding-strip thickness |
| Densidade Core | 1450–1550 kg/m³ |
| Condutividade térmica | 0.20–0.25 W/(m·K) |
| Superfície acabado | Matte muted blue-gray homogeneous vinyl with fine non-directional pattern |
| Tipo conjunto | Butt-jointed tiles or heat-welded sheets over conductive adhesive and copper strips |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Static-dissipative tile or sheet formats.Neutral gray, blue-gray, green and beige color families.Alternative tile dimensions.Matching heat-welding rod.Conductive adhesive and copper-strip accessories.Coordinated coving and skirting details.
Planning a Static-Dissipative Flooring specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
