Blue-gray static-dissipative flooring tile panel with lifted corner and copper strip

ESD および帯電防止製品

静的放散床

Static-Dissipative Flooring provides a durable homogeneous vinyl surface engineered to release accumulated charge at a controlled rate through a properly grounded installation.

Permanently dissipative homogeneous vinyl construction.
Tile or sheet formats for controlled-area layouts.
Grounded installation through conductive adhesive and copper strips.

見積もりリクエスト製品案内

商品紹介

The flooring contains static-control material throughout its compact vinyl thickness rather than relying on a temporary surface treatment. Tiles or sheets are bonded to a prepared substrate, with conductive adhesive and copper strips used where required by the electrical design. The matte, non-directional surface supports frequent cleaning, rolling traffic and coordinated color schemes in controlled technical interiors.

主要な特徴

Homogeneous material preserves dissipative function throughout the usable thickness.

Controlled charge decay is suited to general ESD-sensitive processing environments.

Low-glare surface is easy to inspect and maintain.

Tile format supports localized replacement; sheet format reduces joint count.

Compact construction accommodates rolling chairs and light mobile equipment.

Copper-strip and conductive-adhesive installation integrates with the designated grounding system.

お客様の製品に関する懸念事項

A reliable dissipative floor depends on the covering, adhesive, grounding layout, substrate preparation and maintenance working as one installed system.

A topical antistatic finish wears away.Homogeneous construction distributes dissipative material through the full floor thickness.

Electrical readings differ between floor areas.Conductive adhesive and a planned copper-strip network create defined ground paths across the installation.

Seams trap residue in controlled rooms.Heat-welded sheet seams or accurately fitted tile joints form a smooth cleanable surface.

Rolling chairs leave visible indentation.Compact resilient vinyl is selected for low residual indentation under normal technical-area traffic.

Damaged areas are expensive to repair.Tile format enables localized replacement where maintenance flexibility is a priority.

典型的な用途

Electronics assembly and inspection rooms.Cleanrooms and technical laboratories.Healthcare diagnostic and equipment areas.Precision manufacturing and test facilities.Controlled corridors connecting ESD protected zones.

技術的なパラメータ

The values below represent common homogeneous static-dissipative vinyl formats and may be adjusted to match the room layout and installed grounding design.

コア材料	Permanently static-dissipative homogeneous polyvinyl chloride
パネルの厚さ	2.0 mm
有効幅	610 mm tile width or 2000 mm sheet width
最大長さ	Up to 23000 mm sheet roll length
鋼鉄の厚さを直面する	0.1 mm nominal copper grounding-strip thickness
コア密度	1450–1550 kg/m³
熱伝導率	0.20–0.25 W/(m·K)
表面仕上げ	Matte muted blue-gray homogeneous vinyl with fine non-directional pattern
ジョイントタイプ	Butt-jointed tiles or heat-welded sheets over conductive adhesive and copper strips
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Static-dissipative tile or sheet formats.Neutral gray, blue-gray, green and beige color families.Alternative tile dimensions.Matching heat-welding rod.Conductive adhesive and copper-strip accessories.Coordinated coving and skirting details.

Planning a Static-Dissipative Flooring specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する