Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Productos ESD y Antistáticos
Piso estático-dissipativo
Static-Dissipative Flooring provides a durable homogeneous vinyl surface engineered to release accumulated charge at a controlled rate through a properly grounded installation.
- Permanently dissipative homogeneous vinyl construction.
- Tile or sheet formats for controlled-area layouts.
- Grounded installation through conductive adhesive and copper strips.
Introducción del producto
The flooring contains static-control material throughout its compact vinyl thickness rather than relying on a temporary surface treatment. Tiles or sheets are bonded to a prepared substrate, with conductive adhesive and copper strips used where required by the electrical design. The matte, non-directional surface supports frequent cleaning, rolling traffic and coordinated color schemes in controlled technical interiors.
Características clave
Controlled charge decay is suited to general ESD-sensitive processing environments.
Low-glare surface is easy to inspect and maintain.
Tile format supports localized replacement; sheet format reduces joint count.
Compact construction accommodates rolling chairs and light mobile equipment.
Copper-strip and conductive-adhesive installation integrates with the designated grounding system.
Preocupaciones del producto del cliente
A reliable dissipative floor depends on the covering, adhesive, grounding layout, substrate preparation and maintenance working as one installed system.
A topical antistatic finish wears away.Homogeneous construction distributes dissipative material through the full floor thickness.
Electrical readings differ between floor areas.Conductive adhesive and a planned copper-strip network create defined ground paths across the installation.
Seams trap residue in controlled rooms.Heat-welded sheet seams or accurately fitted tile joints form a smooth cleanable surface.
Rolling chairs leave visible indentation.Compact resilient vinyl is selected for low residual indentation under normal technical-area traffic.
Damaged areas are expensive to repair.Tile format enables localized replacement where maintenance flexibility is a priority.
Aplicaciones típicas
Electronics assembly and inspection rooms.Cleanrooms and technical laboratories.Healthcare diagnostic and equipment areas.Precision manufacturing and test facilities.Controlled corridors connecting ESD protected zones.
Parámetros técnicos
The values below represent common homogeneous static-dissipative vinyl formats and may be adjusted to match the room layout and installed grounding design.
| Materiales Core | Permanently static-dissipative homogeneous polyvinyl chloride |
|---|---|
| Panel de espesor | 2.0 mm |
| Ancho efectivo | 610 mm tile width or 2000 mm sheet width |
| Longitud máxima | Up to 23000 mm sheet roll length |
| Acero frente a espesor | 0.1 mm nominal copper grounding-strip thickness |
| Densidad Core | 1450–1550 kg/m³ |
| Conductividad térmica | 0.20–0.25 W/(m·K) |
| Superficie acabada | Matte muted blue-gray homogeneous vinyl with fine non-directional pattern |
| Tipo conjunto | Butt-jointed tiles or heat-welded sheets over conductive adhesive and copper strips |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Static-dissipative tile or sheet formats.Neutral gray, blue-gray, green and beige color families.Alternative tile dimensions.Matching heat-welding rod.Conductive adhesive and copper-strip accessories.Coordinated coving and skirting details.
Planning a Static-Dissipative Flooring specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
