Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Aço inoxidável sala limpa guarda de canto
A formed 304L or 316L stainless steel protector for exposed 90-degree cleanroom wall corners, designed to absorb routine trolley contact and preserve a smooth cleanable junction.
- 304L or 316L Stainless Steel
- 90-Degree Impact Protection
- Smooth Hygienic Surface
- Adhesive or Concealed Fixing
Introdução do produto
Stainless Steel Cleanroom Corner Guards cover vulnerable external wall corners in corridors, material routes and process support areas. The one-piece formed angle spreads light-to-moderate trolley impact across both wall faces instead of allowing the panel edge to dent or split. Satin-polished 304L suits general indoor clean areas, while 316L can be selected for more aggressive wash and chemical exposure. Guards may be bonded to avoid exposed screw heads or mechanically fixed where replacement access is important, with sealed edges maintaining a simple wipeable surface.
Características-chave
Two- or three-millimeter stainless plate resists denting better than thin decorative trim.
Satin polishing reduces glare while leaving a smooth surface for routine disinfection.
Adhesive mounting provides an uninterrupted exposed face with no particle-catching fasteners.
Full-height and shorter bumper-height formats protect only the traffic zone that needs reinforcement.
Preocupações do produto do cliente
Corner protection must resist repeated impact without becoming a sharp edge, a loose cover or a dirt trap beside the wall finish.
Trolleys strike exposed panel corners and open the sealed wall joint.The formed stainless angle spreads impact over two broad wall faces and shields the original edge.
Thin trim dents quickly and leaves an irregular surface that is hard to wipe.A 2–3 mm guard retains a stable flat face under normal corridor contact.
Exposed screw heads collect residue around the fixing points.Adhesive or rear-concealed fixing keeps the cleanroom-facing surface uninterrupted.
Unsealed perimeter gaps allow moisture and soil behind the protector.A continuous compatible sealant bead closes both vertical edges and the guard ends.
Aplicações típicas
Pharmaceutical cleanroom corridorsHospital sterile-material transfer cornersFood-processing material routesLaboratory trolley cornersClean manufacturing transfer zones
Parâmetros técnicos
Common cleanroom stainless steel corner-guard dimensions and finishes are listed below.
| Material principal | Solid AISI 304L stainless steel; 316L optional |
|---|---|
| Painel de espessura | 2.0 or 3.0 mm formed guard thickness |
| Largura efetiva | 50 × 50 mm or 75 × 75 mm legs |
| Comprimento máximo | 2500 mm |
| Aço enfrentando espessura | 2.0–3.0 mm stainless steel |
| Densidade Core | N/A — solid stainless steel construction |
| Condutividade térmica | N/A — impact protector, not an insulating panel |
| Superfície acabado | 320-grit satin or ASTM No. 4 brushed finish |
| Tipo conjunto | Adhesive-bonded or countersunk mechanical fixing with sealed perimeter |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
304L or 316L grade50 or 75 mm leg widthAdhesive or pre-drilled fixingFull-height or traffic-height length
Planning a Stainless Steel Cleanroom Corner Guard specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
