Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum Wand - und Deckensysteme
Edelstahl Reinraum Corner Guard
A formed 304L or 316L stainless steel protector for exposed 90-degree cleanroom wall corners, designed to absorb routine trolley contact and preserve a smooth cleanable junction.
- 304L or 316L Stainless Steel
- 90-Degree Impact Protection
- Smooth Hygienic Surface
- Adhesive or Concealed Fixing
Produkteinführung
Stainless Steel Cleanroom Corner Guards cover vulnerable external wall corners in corridors, material routes and process support areas. The one-piece formed angle spreads light-to-moderate trolley impact across both wall faces instead of allowing the panel edge to dent or split. Satin-polished 304L suits general indoor clean areas, while 316L can be selected for more aggressive wash and chemical exposure. Guards may be bonded to avoid exposed screw heads or mechanically fixed where replacement access is important, with sealed edges maintaining a simple wipeable surface.
Key Features
Two- or three-millimeter stainless plate resists denting better than thin decorative trim.
Satin polishing reduces glare while leaving a smooth surface for routine disinfection.
Adhesive mounting provides an uninterrupted exposed face with no particle-catching fasteners.
Full-height and shorter bumper-height formats protect only the traffic zone that needs reinforcement.
Kunden Produktbedenken
Corner protection must resist repeated impact without becoming a sharp edge, a loose cover or a dirt trap beside the wall finish.
Trolleys strike exposed panel corners and open the sealed wall joint.The formed stainless angle spreads impact over two broad wall faces and shields the original edge.
Thin trim dents quickly and leaves an irregular surface that is hard to wipe.A 2–3 mm guard retains a stable flat face under normal corridor contact.
Exposed screw heads collect residue around the fixing points.Adhesive or rear-concealed fixing keeps the cleanroom-facing surface uninterrupted.
Unsealed perimeter gaps allow moisture and soil behind the protector.A continuous compatible sealant bead closes both vertical edges and the guard ends.
Typische Anwendungen
Pharmaceutical cleanroom corridorsHospital sterile-material transfer cornersFood-processing material routesLaboratory trolley cornersClean manufacturing transfer zones
Technische Parameter
Common cleanroom stainless steel corner-guard dimensions and finishes are listed below.
| Core Material | Solid AISI 304L stainless steel; 316L optional |
|---|---|
| Panel Dicke | 2.0 or 3.0 mm formed guard thickness |
| Effektive Breite | 50 × 50 mm or 75 × 75 mm legs |
| Maximale Länge | 2500 mm |
| Stahl facing Dicke | 2.0–3.0 mm stainless steel |
| Kerndichte | N/A — solid stainless steel construction |
| Thermische Leitfähigkeit | N/A — impact protector, not an insulating panel |
| Oberfläche Finish | 320-grit satin or ASTM No. 4 brushed finish |
| Gemeinsamer Typ | Adhesive-bonded or countersunk mechanical fixing with sealed perimeter |
| Customisierung | Verfügbar basierend auf der beabsichtigten Anwendung und Betriebsumgebung |
Verfügbare Optionen
304L or 316L grade50 or 75 mm leg widthAdhesive or pre-drilled fixingFull-height or traffic-height length
Planning a Stainless Steel Cleanroom Corner Guard specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
