Round galvanized steel spiral duct with continuous helical lock seam

Sistemas de Distribuição de Ar para Sala Limpa

Ducto de aço galvanizado em espiral

A round galvanized steel duct formed with a continuous spiral lock seam for rigid, aerodynamically efficient cleanroom supply and return routes.

Continuous Spiral Lock Seam
Rigid Round Geometry
Low-Friction Air Path
Gasketed Fitting System

Solicite um orçamento. Browse produtos

Introdução do produto

Spiral duct is manufactured by helically forming galvanized strip into a rigid round tube with a continuous locked seam. The circular cross-section resists pressure deformation efficiently and usually requires less reinforcement than a broad rectangular panel. Factory-made elbows, branches and reducers use male insertion ends with double-lip gaskets or sealed slip joints. Exposed installations benefit from the regular spiral appearance, while concealed cleanroom services gain a compact duct with predictable support and airflow characteristics.

Características-chave

The helical lock seam stiffens the duct wall along its full length without separate external bracing.

A circular bore distributes internal pressure uniformly and supports smooth airflow through long runs.

Double-lip gasketed fittings shorten assembly time and create repeatable insertion joints.

Standard round accessories simplify changes in diameter, direction and branch layout.

Preocupações do produto do cliente

Round duct routes must balance ceiling-space use, joint leakage, hanger spacing and clean fitting transitions at every branch.

Thin round duct ovalizes during transport or hanging.Spiral seam stiffness and correctly spaced circular supports retain the designed diameter.

Field-applied sealant is inconsistent around every fitting.Factory-fitted double-lip gaskets provide uniform circumferential sealing at insertion joints.

Abrupt branch fittings create turbulence and excess pressure loss.Swept bends and gradual conical transitions preserve the round flow path.

Condensation forms on exposed cold supply duct.A continuous external vapor-sealed insulation system is added for the scheduled air temperature and humidity.

Aplicações típicas

Cleanroom supply-air branchesExposed technical-space ductworkReturn-air systemsLaboratory general exhaustAir-handling equipment connections

Parâmetros técnicos

Typical manufacturing ranges for galvanized spiral duct used in HVAC air distribution are listed below.

Material principal	Hot-dip galvanized carbon-steel strip
Painel de espessura	0.45–0.90 mm spiral-formed wall
Largura efetiva	80–1250 mm nominal internal diameter
Comprimento máximo	3000–6000 mm standard straight length
Aço enfrentando espessura	0.45–0.90 mm galvanized steel wall
Densidade Core	Approximately 7850 kg/m³ solid steel construction
Condutividade térmica	Approximately 48–54 W/(m·K) for spiral-forming galvanized strip
Superfície acabado	Bright galvanized surface with optional external powder coating
Tipo conjunto	Gasketed male-female slip joint secured with screws or sealed rivets
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Galvanized, aluminum or stainless constructionFactory-applied external insulationPowder-coated exposed finishGasketed elbows, tees and reducers

Planning a Spiral Galvanized Steel Duct specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe