Round galvanized steel spiral duct with continuous helical lock seam

Temiz Oda Hava Dağıtım Sistemleri

Spiral Galvanized Çelik Kanal

A round galvanized steel duct formed with a continuous spiral lock seam for rigid, aerodynamically efficient cleanroom supply and return routes.

Continuous Spiral Lock Seam
Rigid Round Geometry
Low-Friction Air Path
Gasketed Fitting System

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Spiral duct is manufactured by helically forming galvanized strip into a rigid round tube with a continuous locked seam. The circular cross-section resists pressure deformation efficiently and usually requires less reinforcement than a broad rectangular panel. Factory-made elbows, branches and reducers use male insertion ends with double-lip gaskets or sealed slip joints. Exposed installations benefit from the regular spiral appearance, while concealed cleanroom services gain a compact duct with predictable support and airflow characteristics.

Ana Özellikler

The helical lock seam stiffens the duct wall along its full length without separate external bracing.

A circular bore distributes internal pressure uniformly and supports smooth airflow through long runs.

Double-lip gasketed fittings shorten assembly time and create repeatable insertion joints.

Standard round accessories simplify changes in diameter, direction and branch layout.

Müşteri Ürün Sorunları

Round duct routes must balance ceiling-space use, joint leakage, hanger spacing and clean fitting transitions at every branch.

Thin round duct ovalizes during transport or hanging.Spiral seam stiffness and correctly spaced circular supports retain the designed diameter.

Field-applied sealant is inconsistent around every fitting.Factory-fitted double-lip gaskets provide uniform circumferential sealing at insertion joints.

Abrupt branch fittings create turbulence and excess pressure loss.Swept bends and gradual conical transitions preserve the round flow path.

Condensation forms on exposed cold supply duct.A continuous external vapor-sealed insulation system is added for the scheduled air temperature and humidity.

Tipik uygulamalar

Cleanroom supply-air branchesExposed technical-space ductworkReturn-air systemsLaboratory general exhaustAir-handling equipment connections

Teknik parametreler

Typical manufacturing ranges for galvanized spiral duct used in HVAC air distribution are listed below.

Temel malzemeler	Hot-dip galvanized carbon-steel strip
Panel kalınlığı	0.45–0.90 mm spiral-formed wall
Effective Width (Etkili Genişlik)	80–1250 mm nominal internal diameter
Maksimum uzunluk	3000–6000 mm standard straight length
Çelik yüz yüze kalınlığı	0.45–0.90 mm galvanized steel wall
Core Density (Çekirdek Yoğunluğu)	Approximately 7850 kg/m³ solid steel construction
Termal İletkenlik	Approximately 48–54 W/(m·K) for spiral-forming galvanized strip
Yüzey bitirme	Bright galvanized surface with optional external powder coating
Ortak tip	Gasketed male-female slip joint secured with screws or sealed rivets
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

Galvanized, aluminum or stainless constructionFactory-applied external insulationPowder-coated exposed finishGasketed elbows, tees and reducers

Planning a Spiral Galvanized Steel Duct specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun