Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Systèmes de distribution d'air Cleanroom
Spiral conduit en acier galvanisé
A round galvanized steel duct formed with a continuous spiral lock seam for rigid, aerodynamically efficient cleanroom supply and return routes.
- Continuous Spiral Lock Seam
- Rigid Round Geometry
- Low-Friction Air Path
- Gasketed Fitting System
Introduction de produit
Spiral duct is manufactured by helically forming galvanized strip into a rigid round tube with a continuous locked seam. The circular cross-section resists pressure deformation efficiently and usually requires less reinforcement than a broad rectangular panel. Factory-made elbows, branches and reducers use male insertion ends with double-lip gaskets or sealed slip joints. Exposed installations benefit from the regular spiral appearance, while concealed cleanroom services gain a compact duct with predictable support and airflow characteristics.
Key Features
A circular bore distributes internal pressure uniformly and supports smooth airflow through long runs.
Double-lip gasketed fittings shorten assembly time and create repeatable insertion joints.
Standard round accessories simplify changes in diameter, direction and branch layout.
Préoccupations du client produit
Round duct routes must balance ceiling-space use, joint leakage, hanger spacing and clean fitting transitions at every branch.
Thin round duct ovalizes during transport or hanging.Spiral seam stiffness and correctly spaced circular supports retain the designed diameter.
Field-applied sealant is inconsistent around every fitting.Factory-fitted double-lip gaskets provide uniform circumferential sealing at insertion joints.
Abrupt branch fittings create turbulence and excess pressure loss.Swept bends and gradual conical transitions preserve the round flow path.
Condensation forms on exposed cold supply duct.A continuous external vapor-sealed insulation system is added for the scheduled air temperature and humidity.
Les applications typiques
Cleanroom supply-air branchesExposed technical-space ductworkReturn-air systemsLaboratory general exhaustAir-handling equipment connections
Paramètres techniques
Typical manufacturing ranges for galvanized spiral duct used in HVAC air distribution are listed below.
| Matériaux de base | Hot-dip galvanized carbon-steel strip |
|---|---|
| Panneau épaisseur | 0.45–0.90 mm spiral-formed wall |
| Largeur effective | 80–1250 mm nominal internal diameter |
| Longueur maximale | 3000–6000 mm standard straight length |
| Acier face épaisseur | 0.45–0.90 mm galvanized steel wall |
| Densité Core | Approximately 7850 kg/m³ solid steel construction |
| Conductivité thermique | Approximately 48–54 W/(m·K) for spiral-forming galvanized strip |
| surface finie | Bright galvanized surface with optional external powder coating |
| Type joint | Gasketed male-female slip joint secured with screws or sealed rivets |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Galvanized, aluminum or stainless constructionFactory-applied external insulationPowder-coated exposed finishGasketed elbows, tees and reducers
Planning a Spiral Galvanized Steel Duct specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
